- Optimised for brush application
- Etches the surface for superior adhesion and outstanding metal protection
- Available in 500ml, 1L, 4L
- Available in Green and Grey bases
- Ideal for galvanised iron and Zincalume
- Topcoat after 15 minutes
Product code: 466H0069
Suitable for priming galvanised iron, zincalume, aluminium, copper, brass, stainless steel, steel and wrought iron surfaces. Use in combination with Metalshield topcoats for industrial strength metal protection.
NOTE: Ensure the surface has thoroughly dried prior to application. Do not apply on top of existing painted surfaces. Commercial applications may require additional surface preparation. AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water.
- Metal, Steel, Wrought Iron, Galvanised Iron, Zincalume, Aluminium, Copper, Brass, Stainless Steel
- Specialty, Preparation
- Room Space
- Interior or Exterior
- Application Method
- Roller, Brush, Airspray
- Clean Up
- Clean up with Acetone.