Features
- Easy to handle
- 100% water-based acrylic
- Fills up to 4mm deep blemishes
- Mixes with cement
Benefits
- Fast, efficient application
- Flexible, minimal shrinkage, easy clean up
- Gives smooth surface for textured topcoats
- Forms durable exterior patching material
Product code: 19420806
Surface preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.
Product downloads
- Surfaces
- Masonry
- Type
- Preparation
- Range
- AcraPatch
- Interior or Exterior
- Exterior
- Shelf Life
- 12 months maximium
- Technology Type
- 100% Acrylic
- Pot Life
- 1 hour
- Application Method
- Plastering Tools : Hawk & Trowel, Finishing Float
- Clean Up Type
- Water
- How to Apply
-
Application Guide DULUX AcraTex AcraPatch Course Applied by Plastering Technique (Hawk and Trowel). A spatula knife can be used for isolated patching and often a sponge float is used to spread the material over extensive blow holes. Multiple coats may be needed to fill larger surface irregularities .For exterior application us a power mixing device to incorporate 10% cement. For interior applications use the product as supplied. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. Volume solids 65% Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3 Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
- VOC Level
- < 25g/L untinted
- Weatherability
- Excellent weather resistance when mixed with cement when top coated with a full Acra-Tex system.
- Heat Resistance
- Up to 60C.
- Water Resistance
- Resists rain and condensation when top coated with a full Acra-Tex system.
- Salt Resistance
- Resists salt spray when when top coated with a full Acra-Tex system.
Drying Characteristics
- Touch Dry
- 1 hour (At 2mm DFT)
- Full Cure
- 7 days (25°C,50%R.H.)
- Re-Coat Time
- 24 hours (25°C,50%R.H.)
- Dry Film Thickness
- 1000 (Micron per coat)
- Wet Film Thickness
- 1538 (Micron per coat)
Specifications
DULUX AcraPatch Coarse can be used as a base filler for filling larger surface irregularities & blemishes of up to 4mm per coat. This product can also be used as a skim coat over flush jointed blockwork prior to application of texture coatings. DULUX AcraTex AcraPatch Coarse can be applied to any clean masonry surfaces. It should be top-coated with a selected DULUX AcraTex coating system. The product is also used for the flushing of joints with the addition of 10% clean Portland cement on Fibre Cement Sheetings incorporating an alkaline resistant fibre mesh and then as an entire skimcoat ( no cement ) over the board when the joints have dried.
Share
product details