The mid-level sheen of Dulux Wash&Wear Semi Gloss is a finish that works well on walls or even as an alternative to enamels on doors and skirting boards. 101 Barrier Technology creates a tough, hard wearing barrier that withstands wear and tear.
Features
- 101 Barrier Technology
- Withstands wear and tear
- Low odour & Low VOC at <16g/L tinted & untinted (Volatile Organic Compounds contribute to atmospheric pollution)
- Available in Vivid White, Deep and Ultra Deep bases
- Available in 1L, 2L, 4L, 10L, 15L
Benefits
- Wipe away most common marks, scuffs and stains with a wet cloth
- Looks freshly painted for years
- Exceptional washability
Product code: 52S
Uses
Dulux Wash&Wear Semi Gloss is recommended for all walls including frequently cleaned areas and wet areas.
Surface preparation
Surface must be clean, dry and free from dust, oils and grease. Cracks or holes with filler: Spot prime repairs with Dulux 1 Step® Water Based Glossy surfaces: Lightly sand to a dull finish Unpainted plasterboard, brick, cement: One coat of Dulux 1 Step® Water Based Bare timber: One coat of Dulux 1 Step® Water Based Set plaster, fibrous plaster, plasterglass: One coat of Dulux Sealer Binder
Product downloads
- Coverage
- 16 square metres per L
- Surfaces
- Brick, Cement, Bare Timber, Set Plaster, Fibrous Plaster, Plasterglass, Timber, Steel (Galv), Previously painted Timber/MDF/Weatherboard, Concrete, Masonry, Plasterboard, Set plaster, Water proof plaster board, Brick & Block, Previously painted Plasterboard, Precast / Tilt up Concrete, Off Form Concrete, Steel (mild), Non ferrous metals
- Type
- Wall
- Area
- Wall, Door, Window, Skirting, Balustrade, Architrave, Partitioning, Cornice, Steelwork, Ceiling, Shelving & storage
- Range
- Wash&Wear
- Room Space
- Bedroom, Living room, Hallway, Dining room, Lounge, Office
- Interior or Exterior
- Interior
- New or Repaint
- New, Repaint
Performance Guide
- Green Star
- Complies with the requirements for the Indoor Environment Quality credit in Green Star Australia rating tools
- VOC Level
- < 16 g/L tinted and untinted
- Weatherability
- Not recommended for exterior use
- Heat Resistance
- Softens and sticks to other painted surfaces over 70C
- Water Resistance
- Suitable for use in wet areas
- Solvent Resistance
- Sensitive to aromatic hydrocarbons and alcohols
- Alkaline Resistance
- Marks and soiling easily removed. Excellent wet and dry burnish resistance.
Drying Characteristics
- Full Cure
- 7 days
- Re-Coat Time
- 2 hours
Health Safety
- Clean Up
- Clean all equipment with water.
Share
product details