Professional® Cold Galv Metal Primer
About Professional® Cold Galv Metal Primer
Dulux Professional® Cold Galv Metal Primer is a one-pack zinc rich primer that withstands severe corrosion conditions.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Downloads
Application
At a glance
- Available in Grey base
- One pack
- Zinc rich
- Available in 4L
- Ready to apply
Previously Painted Surfaces
The surface to be primed must be clean, dry and free from oil, rust and millscale. Ideally the surface to be coated should be sand blasted, then primed on the same day. Where this is impracticable, oxyacetylene flame cleaning and descaling or other mechanical preparation may be employed. This is essential to achieve maximum protection. DO NOT USE CLEANING FLUIDS CONTAINING ACID, AS THIS WILL REACT WITH THE COATING CAUSING LACK OF ADHESION.
Brush, roller
Before and occasionally during use, stir thoroughly with a broad flat stirrer, using an upward lifting action. This is essential, due to the high zinc content and the tendency to settle. Brush/Roller: Apply by brush only to ensure good film build. Apply a full even coat. Thin if necessary with up to 100ml per litre of Dulux Spraying Thinners. Not suitable for application by roller. Airless/Convention Spray: Not suitable for application by this method.
Choose from our wide selection of licensed and insured painters to find the right one for your job.
Our friendly Help and Advice team can help you. Call 13 25 25 and speak to one of our team members or submit an enquiry via our online form.
Book now to have an online or in-home colour consultation with a qualified interior designer.
