Creativo® Microcement Fondo Part A
About Creativo® Microcement Fondo Part A
Microcement Fondo Part A has to be mixed with Microcemento Part B (ratio 2:1) before application. It is designed to be used as a base coat, but can also be used as a finishing coat when a highly textured design is the goal. In this latter case Microcement Fondo can be coloured with Dulux tinters to our dedicated Microcement colour range.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Downloads
Application
At a glance
- Water based
- Full system suitable over plasterboard, concrete & cement screed and over existing tiles in sound condition
- Interior and exterior use
Previously Painted Surfaces
• Apply on clean, dry surfaces, free of oil, grease, dust, wax, silicone, sealants or any other element that may affect the adhesion of the system.
• Clean the surface with a degreasing product.
• Make sure that the tiles are well fixed and not detaching.
• Do not apply the product where there is rising damp.
• Ensure moisture content is less the 10% as measured with a standard moisture meter
Brush, roller
Refer to DuSpec+ Product Specification for application.
Unused paint
Refer to the products label and the Material Safety Data Sheet
Get in touch with our local Help & Advice team by calling 13 25 25. The Dulux Help & Advice team are experts available to assist with colour, product and service questions.
