Acratex® Roof Bond GI with InfraCOOL Technology is a quick drying high TSR water based primer which provides good adhesion and corrosion resistance for new or weathered galvanised / Zincalume surfaces.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Roofing surfaces
Ensure the surface to be painted is clean, dry and free from dust, dirt, grease, oils and wax by wiping or scrubbing the surface with rags or brushes wetted with mineral turpentine or white spirit, followed by wiping with clean rags. Loose or peeling/flaking paint must be completely removed. Care should be taken to avoid damaging the protective galvanised film.
Any rust areas or where galvanising has eroded must be cleaned back to bare metal with a wire brush or abrasive paper, washed, dried and spot primed with 2 coats of Luxaprime Zinc Phosphate. The cleaned and dry surface should be primed as soon as possible.
Brush, roller, and airless spray
Stir contents thoroughly with a broad flat stirrer, using a stirring, lifting action.
Brush/Roller: Apply an even coat to the prepared surface direct from the can.
Airless Spray: Suitable for application by all standard spray equipment. If necessary thin up to 50 ml per litre with water to aid atomization.
Unused paintDo not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.Empty paint containersLeave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. Do not reuse container. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Download the app and register to receive a $10 voucher to spend on your first purchase of interior broadwall paint.
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.