Acratex® RenderWall® Plus AcraPro® Joint & Skim
About Acratex® RenderWall® Plus AcraPro® Joint & Skim
Acratex® RenderWall® Plus AcraPro® Joint & Skim is a high polymer multi-use dry mix basecoat for Fibre Cement (Blueboard) Joint Setting & Skim coating, and as a Patching & Skimcoat compound for Off-Form Concrete, AAC and EPS foam. Supplied in dry powder form, RenderWall AcraPro Joint & Skim requires only the addition of clean potable water to produce a high strength adhesive joint setting and basecoat compound.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Downloads
Application
At a glance
- Pre-packed
- Controlled formulation
- Good adhesion
- Easy to handle
Previously Painted Surfaces
REFER TO THE BAG LABEL FOR DETAILED INFORMATION
Brush, roller
MIXING
Mix Ratio (approx. 15L mixed RenderWall AcraPro Joint & Skim) ¦ 20kg (1 full bag) of RenderWall Joint & Skim ¦ Approx 3.5 litres of fresh clean water Refer to SAFETY for handling instructions ¦ Measure the water component into a 15L pail and add the powder while mixing with a suitable power Mixing Drill ¦ Allow to stand for 3-5 minutes ¦ Remix and adjust consistency with up to 0.5L additional water (once) relative to application requirement Product usage Scaling factor = 1.7 kg (dry powder) per sqm per 1mm thick (eg. a 3mm thick application requires (3 x 1.7) = 5.1 kg per sqm of RenderWall AcraPro Joint & Skim powder)
Unused paint
Refer to the products label and the Material Safety Data Sheet
Shop with us when you want, how you want.
DuluxTRADE Online
Download the app and register to receive a $10 voucher to spend on your first purchase of interior broadwall paint.
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.