Fluoroset is a ultra durable fluoropolymer powder coating available in a range of solid colours and gloss levels.

All are suitable for interior and exterior product applications where colour and gloss retention are critical, but usage is targeted on monumental and landmark projects. Supported by a 30 year durability warranty* on aluminium they meet the performance requirements of AAMA2605.
*Subject to the terms and conditions of the relevant product warranty. Please contact your local Dulux representative for further details.


  • Ultra Durable Fluoropolymer Powder Coating
  • Warranty* performance on aluminium: 35 year durability warranty and 30 year chalk and colour fade warranty on pre-treated architectural aluminium when applied by a Dulux Registered Applicators
  • Range of solid colours and gloss levels
  • Formulated to meet: AS 3715, AS 4506 and AAMA 2605.


  • Guaranteed performance on appropriately pre-treated aluminium - see warranty* details
  • Superior colour retention
  • Hard wearing/serviceable finish
  • Ideal for interior projects and exterior projects, especially monumental and landmark residential and commercial projects

Product code: 964


Developed primarily for use on extruded aluminium, including window and door joinery, and extruded aluminium panel work including major commercial projects.

Surface preparation

Surfaces should be prepared according to appropriate standards such as AAMA 2605, AS/NZS4506 or AS3715 (available from Standards Australia or Standards New Zealand offices).

Product downloads

Galvanised Steel, Stainless Steel, Steel (mild), Zincalume, Non ferrous metals, Aluminium
Powder Coating
Fluoroset Powdercoat Range
Interior or Exterior
Interior, Exterior
Application Method
Electrostatic Spray

Performance Guide

Green Star
Dulux ® Powder Coatings are a prime consideration for projects where air quality standards have been set, such as 4, 5 & 6 Green Star Rating Projects.
VOC Level
Virtually zero (please consult Dulux for details)
Superior resistance to weathering.
Salt Resistance
Excellent salt spray resistance over pre-treated aluminium (4000 hours ASTM B117)

Cure Schedule

Metal Temperature
210° : 15 mins minimum
200° : 20 mins minimum
190° : 25 mins minimum


How to Specify Aluminium
Example – (Dulux Fluoroset® Xtreme™ White Satin 964-1157M) to meet AAMA 2605. Product must be applied by a Dulux Registered Aluminium Applicator and must offer a 35 year durability warranty.

How to Specify Steel
Example – Powder Coating of (Components to be coated) (Atmospheric Classification) (Substrate) with (Dulux Fluoroset® Xtreme™ White Satin 964-1157M) to meet AS4506. Compliance to this standard must be demonstrated through provision of a certificate from the coating applicator outlining the relevant, “atmospheric classification, substrate and method of chemical or mechanical surface preparation.

Care and Maintenance

Refer to AAMA 609 and 610

As a general rule, cleaning of externally located powder coating surfaces must take place every six months. Where salts/pollutants are more prevalent such as seaside, industrial and geothermal areas, a cleaning program should be carried out more frequently.


  1. Remove loose deposits with a wet sponge (avoid scratching the surface by dry dusting).
  2. Using a soft clean cloth and a mild detergent in warm water, clean the powder coating to remove dust, salt or other deposits.
  3. Always rinse after cleaning with fresh water to remove any remaining detergent.


In some cases, strong solvents recommended for thinning various types of paints and also for cleaning up mastics/sealants are harmful to the extended life of the powder coated surface. These solvents should not be used for cleaning purposes and will render the warranty void if used. If paint splashes or sealants/mastics need to be removed then the following solvents can be used safely: Methylated Spirits, Ethyl Alcohol, Isopropanol.


Warranty Information

Warranty* performance on aluminium:

  • 35 year durability warranty
  • 30 year chalk and colour fade warranty

On pre-treated architectural aluminium when applied by a Dulux Registered Applicators