Dulux Luxafloor ECO2™ is a two-pack, waterborne epoxy floor coating ideal for interior use. Luxafloor ECO2™ is designed for pedestrian traffic conditions where solvent odour may be a concern. The fast dry characteristics of Luxafloor ECO2™ allows up to three coats to be applied in a single day, and ready for light traffic in a day or two.

Features

  • Very low VOC and odour (<10 g/l when mixed)
  • Wash up in water
  • Very fast dry
  • Available in a standard range of factory packaged colours and tinted pastel colours and Clear

Benefits

  • Short cure time allows multiple coats in a day to achieve a trafficable floor sooner
  • Low odour formula ideal for hospitals, aged care facilities and schools
  • Suitable for facilities with very short down-time available for maintenance
  • Tough and chemical resistant

Product code: 714


Uses

Floor coating for internal concrete floors in commercial and industrial applications . Typically used on internal floors of: cafes, schools, warehouses.

Surface preparation

Concrete must be at least 28 days old before coating. Remove all laitance, curing compounds, oil, grease and other surface contaminants. Diamond grind, track or light shot-blast to remove laitance and provide a suitable profile. Remove all dust by vacuum cleaning. Fill any large cracks or voids using Luxepoxy Filler. Ensure moisture content is below 10%.

Product downloads

Surfaces
Concrete
Type
Concrete Flooring
Area
Floor, Concrete floor
Range
Luxafloor
Interior or Exterior
Interior
New or Repaint
New, Repaint
Application Method
Roller, Brush, Airless spray, Conventional Spray
Weatherability
Will yellow with time and chalk on exterior exposure. Neither yellowing nor chalking detracts from the protective properties of the coating.
Heat Resistance
Up to 120°C dry heat.
Water Resistance
Excellent resistance to fresh and salt water. Not suitable for immersion.
Abrasion Resistance
Excellent abrasion resistance when fully cured. CS-17 wheels 120 mg/1000 cycles (Taber Abrasion @ 1000g load/wheel)
Solvent Resistance
Good resistance to splash and spillage of aromatic and aliphatic hydrocarbon solvents and alcohols
Acid Resistance
Good resistance to splash and spillage of dilute acids
Alkaline Resistance
Good resistance to splash and spillage of most common alkalis
Salt Resistance
Excellent resistance to neutral and alkaline salts

Specifications

Concrete: Detergent wash if necessary to remove oily deposits. Diamond grind to remove surface imperfections and laitance and provide a good key for the coating system. Typical system: 2 x Luxafloor ECO2™ @ 65 microns per coat.