A flexible acrylic texture applied directly from the bucket by mitt application. A range of effects can be easily achieved by finishing with a lambswool hand mitt applicator, sponge, brush or broom. This traditional bagging texture is used to create a coloured mottled appearance over brickwork, diffusing, but not completely hiding the brick pattern. It can also be used to create a textured effect over smooth masonry surfaces.

Features

  • Bagged render finish
  • Achieve multiple effects
  • Hand mitt applied
  • Water based
  • Available in 4L, 10L

Benefits

  • Same day recoat and clean up
  • Proven durability at high film builds
  • Achieves texture finish without special training

Product code: 19585715


Uses

Application to bricks, cement render, fibre cement and masonry surfaces.

Surface preparation

All surfaces must be thoroughly cleaned and free of all dirt, loose and flaking paint. Efflorescence or mould must be treated before application of paint. New concrete, mortar or cement render must be allowed to cure for 4 to 8 weeks depending on concrete thickness and drying conditions. Fill holes with grouting cement. Wash down with water using a stiff brush to remove all loose material. To test the adhesion of previously painted surfaces, cut an X through the existing paint with a sharp blade, press cellulose tape firmly across the cut and then rip the tape off. If the old paint or render comes off, it should be removed. On porous surfaces, applying a priming coat thinned with water (4 parts Medium Texture: 1 part water) will condition the surface and help aid application of additional coats.

Product downloads

Coverage
3 square metres per L
Surfaces
Brick
Type
Wall
Area
Wall
Range
Texture
Room Space
Outdoor
Interior or Exterior
Exterior
Application Method
Lambswool hand mitt applicator

Performance Guide

Gloss Level
3
VOC Level
< 60g/L untinted
Weatherability
Excellent resistance to weathering with minimal colour change and dirt pick up.
Heat Resistance
Softens and suffers from dirt pick up over 70 degrees
Water Resistance
Resists prolonged rain and condensation.

Specifications

A flexible acrylic texture applied directly from the bucket by mitt application. A range of effects can be easily achieved by finishing with a lambswool hand mitt applicator, sponge, brush or broom. This traditional bagging texture is used to create a coloured mottled appearance over brickwork, diffusing, but not completely hiding the brick pattern. It can also be used to create a textured effect over smooth masonry surfaces.

Health Safety

Clean Up
Clean all equipment with water