Hebel® PowerFinish is a mid build, trowel applied flexible acrylic finishing and barrier texture coat that provides the decorative final layer delivering a fine Tuscan style finish whist maintaining barrier performance through its unique water phobic. Can be overcoated with AcraShield weather-proofing barrier topcoat for optimum weatherability.

Features

  • Acrylic polymer
  • Even granular appearance
  • Iron Oxide free

Benefits

  • Barrier agianst moisture and dirt pick up
  • Flexible & non shrinkage , easy & ecconomical to apply
  • Tuscan style look & finish

Product code: 19485946


Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.

Product downloads

Surfaces
Hebel Power Panel
Type
Trowel On
Area
Wall, Parapet
Range
Hebel
Room Space
Apartment Building, Residential Property
Interior or Exterior
Exterior
Shelf Life
24 months maximum
Technology Type
100% Acrylic
NBR Coats
1
Application Method
Trowel
Clean Up Type
Water
How to Apply

Application Guide Hebel® PowerFinish Advance is applied by Plastering Technique (Hawk and Trowel) and float finished to achieve an even granular appearance. Two applicators are required for most areas - one applying the other processing the finish. Delivery must be to a uniform thickness. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 77%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.

VOC Level
<28.4g />L untinted
Weatherability
Excellent resistance to cracking, flaking and chalking as part of a full Acra-Tex system
Heat Resistance
Up to 90C (dry)
Water Resistance
Water resistant with good vapour permeability
Salt Resistance
Resists salt spray especially when topcoated with DULUX AcraTex AcraShield Advance.

Drying Characteristics

Touch Dry
1 hour
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours (25°C,50%R.H.)
Dry Film Thickness
706 (Micron per coat)
Wet Film Thickness
917 (Micron per coat)

Specifications

Applied by Plastering Technique (Hawk and Trowel) and Float Finished to produce a Flexible Acrylic Finishing Texture and Weatherproofing coat over Hebel PowerBase for Residential facades
Hebel PowerFinish Advance is specified in system with Hebel PowerBase specifically for Hebel PowerPanel
Typical System Specification Hebel PowerFinish Advance specified in the AcraTex POWER System for New Residential
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer Not required on clean Hebel PowerPanel - - -
Base Coat Hebel PowerBase LW 0.45 2200 2000
Texture Barriercoat Hebel PowerFinish Advance 0.9 900 700
Minimum system DFT 2700
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
AcraShield Elastomeric shieldcoat is recomended where accent colours are required and for maximum performance in coastal/harsh locations

Health Safety

Clean Up
Clean all equipment with water.