DULUX AcraTex Roof Sealer WB is a full acrylic, water based primer/sealer for use on cleaned concrete tile surfaces in sound condition. NOT suitable where the surface after High Pressure Washing is Powdery of Friable – Use AcraTex Roof Sealer SB in such cases.
Features
- Water based
- Excellent pentration & adhesion
- Fast dry
Benefits
- Easy application, clean up
- Foundation for uniform adhesion & durability of Roof Membrane Next Generation
- 2 Hour recoat
Product code: 19485940
Surface preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product downloads
- Surfaces
- Concrete Roof Tile
- Type
- Roof Restoration|Preparation
- Area
- Roof
- Range
- Roof Sealer
- Interior or Exterior
- Exterior
- Shelf Life
- 24 months maximium
- Technology Type
- 100% Acrylic
- NBR Coats
- 1
- Application Method
- Airspray, Airless Spray
- Clean Up Type
- Water
- How to Apply
-
Application Guide DULUX AcraTex Roof Sealer WB is a applied by airless spray and allow to dry minimum 2 hours before topcoating. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. Volume solids 30% Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3 Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.
- VOC Level
- < 10.1g/L untinted
- Weatherability
- Excellent resistance when topcoated
- Heat Resistance
- Resistant up to 90 degrees celcius when topcoated with Roof Memebrane Next Generation
- Water Resistance
- Excellent resistance when topcoated with Roof Membrane Next Generation
- Solvent Resistance
- Resists dilute solvent
- Acid Resistance
- No reaction to 3% hydrochloric acid
- Alkaline Resistance
- No reaction to 1% caustic solution
- Salt Resistance
- Excellent resistance when topcoated with Roof Membrane Next Generation
Drying Characteristics
- Touch Dry
- 30 Minutes
- Full Cure
- 7 days (25°C,50%R.H.)
- Re-Coat Time
- 2 hours (25°C,50%R.H.)
- Dry Film Thickness
- 25 (Micron per coat)
- Wet Film Thickness
- 83 (Micron per coat)
Specifications
DULUX AcraTex Roof Sealer WB is used to unify and consolidate correctly prepared concrete roof tiles providing a good key for DULUX AcraTex Roof Membrane Next generation. It is designed to condition and even the substrate porosity to provide maximum coverage for DULUX AcraTex Roof Membrane Next generation. Note : Not suitable where the tile surface is excessively friable (eg powdery surface easy to remove by scratching-scraping), where the use of AcraTex Roof Sealer( Solvent based) is recommended
Share
product details