DULUX AcraTex Prep Treat is a water based low toxicity fungal & algal treatment designed to be applied and left on pre-cleaned surfaces prior to subsequent coating systems providing a residual sterilizing effect at the substrate-coating interface where often mould and algal spores are trapped causing film spoilage from under the coating.

Features

  • Water based
  • Fast dry

Benefits

  • Easy application, clean up
  • Effective that prevents recurrence of mould growth
  • 2 Hour recoat

Product code: 19485771


Uses

DULUX AcraTex Prep Treat is designed for pre-treatment of concrete roof tiles as part of the DULUX AcraTex Next Generation Roof Membrane system. PrepTreat is also suitable for surface treating of walling surfaces prior to AcraTex Coatings systems for enhance protection of substrate active fungal and algal spores. PrepTreat is NOT a cleaning solution - It is designed to be applied after cleaning to sterilise the surface and provide a residual effect under subsequently applied coatings.

Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.

Product downloads

Surfaces
Masonry
Type
Spray On
Range
Prep Treat
Room Space
Outdoor
Interior or Exterior
Exterior
Shelf Life
24 months maximum
Technology Type
Low toxicity
NBR Coats
1-2 subject to surface contamination
Application Method
Low pressure spray, Airless spray
Clean Up Type
Water
How to Apply

Application Guide Apply DULUX AcraTex Prep Treat liberally to problem surface via garden pressure spray unit. Let set for 24 hours for optimium results. Remove any dead debris by scrubbing with a stiff bristle brush or using a garden hose with nozzle at maximum velocity. Apply a 2nd coat prior to application of Dulux AcraTex Roof Memebrane Next generation or Cool Roof Next generation for increased protection. Allow to dry. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 2.0%
Toxicity Lead Free. Dry is non toxic,drinking, water safe.
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.

Drying Characteristics

Touch Dry
15-20 Minutes
Re-Coat Time
4 hours (25°C,50%R.H.)