DULUX AcraTex Roll On 3mm is a flexible 100% acrylic, low-mid profile Texture Coating applied variously by medium or coarse texture roller to produce a distinctive granular roller stipple Roll On 3mm provides feature style with good covering ability to accommodate less than perfectly leveled substrates Specified in system with AcraShield Advance weather-proofing barrier topcoat for optimum weatherability.

Features

  • Water based
  • Provides substrate protection and a decorative texture look

Benefits

  • Easy, safe and economical clean-up
  • Reduced maintenance when top coated with Acrashield Advance
  • Application with medium texture roller
  • Exterior durability

Product code: 19420815


Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Product downloads

Surfaces
Concrete, Masonry, CSR Hebel Block, CSR Hebel Power Panel, Cement Rendered (sponged finish), AAC, Compressed fibre cement sheet, Brick & Block, Precast / Tilt up Concrete, Off Form Concrete
Type
Roll On
Area
Fence, Gable, Wall, Column, Cladding, Soffit, Parapet
Range
Roll On
Room Space
Apartment Building, Residential Property, Office
Interior or Exterior
Exterior
Shelf Life
24 months maximium
Technology Type
100% Acrylic
NBR Coats
1
Application Method
Medium Texture Roller, Hopper Gun, Texture Spayer
Clean Up Type
Water
How to Apply

Application Guide Dulux AcraTex Roll-On 3mm Grade: Low profile by medium texture roller at 1.3 sq.m/l, high profile by coarse texture roller at 1.1 sq.m/l, stucco by regular texture roller/steel trowel at 1.0 sq.m/l. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 60%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.

Performance Guide

Performance Data

Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with Acrashield Advance
Water Vapour Transmission AS458.5/C g/24h/m2 55g/24h/m2 Allows substrate to breath even when top coated with Acrashield Advance
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with Acrashield Advance
Caustic Soda diluted N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Alchol N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

VOC Level
< 40g/L untinted
Weatherability
Excellent resistance to cracking, flaking and chalking when topcoated with DULUX AcraTex AcraShield Advance.
Heat Resistance
Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance
Resists water and condensation when topcoated with DULUX AcraTex AcraShield Advance.
Salt Resistance
Resists salt spray especially when topcoated with DULUX AcraTex AcraShield Advance.

Drying Characteristics

Touch Dry
60 minutes
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours (25°C,50%R.H.)
Dry Film Thickness
450 (Micron per coat)
Wet Film Thickness
750 (Micron per coat)

Specifications

Applied by medium cell Texure Roller to produce a medium profile (aggregate containing) Texture Finish for Commercial or Residential facades
Roll On 3mm is specified in system with AcraPrime and AcraShield Advance
Typical System Specification Roll On 3mm specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat Roll On 3mm 1.3 750 450
Protective Barriercoat AcraShield Advance 6 166 75
Minimum system DFT 550
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Health Safety

Clean Up
Clean all equipment with water after use.