DULUX AcraTex 00 is a flexible 100% acrylic, low profile Texture Coating applied variously by medium or coarse texture roller to produce a roller stipple finish or by gravity feed hopper spray to produce a low profile decorative spray stipple. Specified in system with AcraShield weather-proofing barrier topcoat for optimum weatherability.

Features

  • Water based
  • Easy to apply by texture roller
  • Versatile application

Benefits

  • Easy, safe and economical clean-up
  • Range of texture profiles possible
  • Application with roller or spray
  • Exterior durability

Product code: 19420814


Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.

Product downloads

Surfaces
Concrete, Masonry, Cement Rendered (sponged finish), AAC, Compressed fibre cement sheet, Brick & Block, Precast / Tilt up Concrete, Off Form Concrete, Fibre cement sheet
Type
Roll On
Area
Fence, Gable, Wall, Column, Cladding, Soffit, Parapet
Range
Roll On
Room Space
Apartment Building, Residential Property
Interior or Exterior
Exterior
Shelf Life
24 months maximium
Technology Type
100% Acrylic
NBR Coats
1
Application Method
Medium Texture Roller, Hopper Gun, Texture Spayer
Clean Up Type
Water
How to Apply

Application Guide Dulux AcraTex Roll-On 00 Low profile by regular texture roller at regular texture roller at 1.53 sq.m/l. High profile by coarse texture roller at 1.3sq.m/l , apply regular texture roller/steel trowel at 1.25 sq.m/l, to achieve stucco texture or alternative by spray - hopper gun at 1.7 sq.m/l to a stipple tetxture. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 60%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.

Performance Guide

Performance Data

Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with Acrashield Advance
Water Vapour Transmission AS458.5/C g/24h/m2 55g/24h/m2 Allows substrate to breath even when top coated with Acrashield Advance
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with Acrashield Advance
Caustic Soda diluted N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Alchol N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Distilleed Water N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Detergent Solution N/A N/A No reaction Test resulst are with Acrashield Advance top coat

VOC Level
< 25g/L untinted
Weatherability
Excellent resistance to cracking, flaking and chalkingwhen topcoated with DULUX AcraTex AcraShield.
Heat Resistance
Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance
Resists rain and condensation when top coated with a full Acra-Tex system.
Salt Resistance
Resists salt spray especially when topcoated with DULUX AcraTex AcraShield Advance.

Drying Characteristics

Touch Dry
60 minutes
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours (25°C,50%R.H.)
Dry Film Thickness
350 (Micron per coat)
Wet Film Thickness
583 (Micron per coat)

Specifications

Applied by medium cell Texure Roller to produce a low profile (non-aggregate) Texture Finish for Commercial or Residential facades
Roll On 00 is specified in system with AcraPrime and AcraShield
Typical System Specification Roll On 00 specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 10 100 25
Texture / Body Coat Roll On 00 1.7 600 350
Protective Barriercoat AcraShield Advance 6 166 75
Minimum system DFT 450
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Health Safety

Clean Up
Clean all equipment with water after use.