UltraAir® Interior Primer
About UltraAir® Interior Primer
Dulux UltraAir® Interior Primer is an ultra-low chemical emissions*, ultra-low odour premium water-based paint.
Proven to emit fewer chemical emissions*, Dulux UltraAir® maintains your indoor air quality. It's a whole-of-home product that is recommended for use in conjunction with Dulux UltraAir® Interior Wall products and Dulux UltraAir® Ceiling White products to achieve an ultra-low chemical emissions system. Dulux UltraAir® is GREENGUARD Gold certified and Global GreenTag™ GreenRate™ Level A and PlatinumHEALTH™ certified. Dulux UltraAir® can contribute to the achievement of Green Star and WELL project certifications. So take a deep breath, relax and enjoy your great indoors.
Downloads
Application
*Ultra-low chemical emissions: Tested to pass SRIBS emission limits of <1mg/m3 within 3 days.
At a glance
- Lasting finish
- Available in Vivid White™ base only
- Premium quality Dulux paint that lasts
- Helps maintain indoor air quality
Areas to use
Performance guide
Dulux UltraAir® Interior Primer is suitable for all interior walls. It is a whole-of-home product that is recommended for use in conjunction with Dulux UltraAir® Interior Walls and Dulux UltraAir® Ceiling White products to achieve an ultra-low chemical emissions* system.
*Ultra-low chemical emissions: Tested to pass SRIBS emission limits of <1mg/m3 within 3 days.
Surfaces
• Masonry
• Paper-faced plasterboard
Previously Painted Surfaces
Previously painted surfaces:
• Scrape off loose and flaking paint.
• Wash with Selleys® Sugar Soap to remove grease and grime.
• Fill nail holes and cracks with a suitable flexible filler, then sand smooth.
Chalky surfaces:
• Use PRECISION® Sealer Binder^. Surfaces should be sanded back to a strongly bound surface and dusted off.
^Note: Chemical emissions will not be Ultra Low if this product is used under Dulux UltraAir®.
Unpainted Surfaces
Unpainted surfaces:
Fill imperfections with a suitable flexible filler, sand smooth and dust off.
For bare plaster and powdery surfaces use Dulux PRECISION® Sealer Binder^.
^Note: Chemical emissions will not be Ultra Low if this product is used under Dulux UltraAir®.
Brush, roller
1. Stir well before use with a broad flat paddle using an up and down scooping action.
2. Apply one coat of Dulux UltraAir®.
3. For paper-faced plasterboard, where there is different texture between paper and joining compound, or where extra filling and smoothness are required, apply a second coat of UltraAir® Primer.
4. Over rougher textures sand the existing paint surface before applying UltraAir® Primer.
5. Once this coating is completely dry, lightly sand the surface.
6. If the surface imperfections are very prominent, or where extra smoothness and filling is required, apply a second coat of UltraAir® Primer.
Note: this product will not completely obscure surfaces where the paint or texture profile is very rough.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
For more information visit paintback.com.au
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
For more information visit paintback.com.au