Dulux

Spray Multi-Surface Primer

Dulux Spray Multi-Surface Primer 340g 33VD1287
Product
Select Colour
Check Delivery
Find a store

Delivery within 1-3 business days.

About Spray Multi-Surface Primer

High performance multi-surface primer
Ideal for use on glazed tiles, glass, laminate, uPVC & glossy enamels
Fast drying

Dulux Spray Multi-Surface Primer with Duramax Technology™ is specifically formulated to bond to a variety of tough to paint surfaces that typically resist coating. Fast drying and drip free formulation ensures projects can be completed quickly without compromise on finish.

At a glance

  • Fast drying spray paint
  • Ideal for priming tough to coat surfaces
  • Interior & exterior durability
  • Soft touch spray tip
  • Touch dry in 15 minutes
  • Coverage: up to 1.5m2

Areas to use

Can be used on hard plastics including: PU, PS, PA, EPDM, ABS, GRP and hard PVC
Note: Some plastics like polyethylene do not allow for paint adhesion even with primers.
Test the plastic projects in an inconspicuous area first.

Previously Painted Surfaces

The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray.

 

For wood, most metals (non-ferrous), porous and previously painted surfaces, and most plastics (uPVC and ABS) lightly sand the surface, no primer is required.

 

For other plastics we recommend using Dulux Spray Plastic Primer to prime your plastic.

 

For tiles, glass, enamels and laminate we recommend priming the surface with Dulux Spray Multi-Surface Primer.

Airless/Conventional Spray

1. BEFORE SPRAYING
Shake can for at least two minutes after first rattle and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Do not spray when air or surface temperature is below 10°C or above 30°C.

 

2. SPRAY APPLICATION
Hold can upright 20 to 25cm from the surface. To ensure surface compatibility, test spray on an inconspicuous area. Spray with smooth, even strokes parallel to the surface. This
product is formulated to resist running and sagging. It should be applied in several light coats, as opposed to one heavy coat.
Re-coating: Any time after 30 minutes.
Coverage: Up to 1m² per can, depending on surface.
Drying: Touch dry in 30 minutes under normal conditions.

 

3. AFTER SPRAYING
Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.

Unused paint

Spray unwanted paint onto newspaper, allow to dry and dispose of remaining contents/container in accordance with local, regional, national and international regulations.

If can becomes rusted or damaged dispose of carefully – obtain instructions from our website
or 24hr Emergency Response Number.

Cart
You have no items in your cart.
Dulux dog