Creativo® Microcement Finitura Part A
About Creativo® Microcement Finitura Part A
Microcement Finitura Part A has to be mixed with Microcemento Part B (ratio 2:1) before application. It is designed to be used as a finishing coat and will need to be tinted to the final dedicated Dulux Microcement colour range using using Dulux tinters.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Downloads
Application
At a glance
- Full system suitable over plasterboard, concrete & cement screed and over existing tiles in sound condition
- Interior and exterior use
- Water based
Previously Painted Surfaces
• Apply on clean, dry surfaces, free of oil, grease, dust, wax, silicone, sealants or any other element that may affect the adhesion of the system.
• Clean the surface with a degreasing product.
• Make sure that the tiles are well fixed and not detaching.
• Do not apply the product where there is rising damp.
• Ensure moisture content is less the 10% as measured with a standard moisture meter
Brush, roller
Refer to DuSpec+ Product Specification for application.
Unused paint
Refer to the products label and the Material Safety Data Sheet
Get in touch with our local Help & Advice team by calling 13 25 25. The Dulux Help & Advice team are experts available to assist with colour, product and service questions.
