A water based timber and grain filler, suitable for both interior and exterior use. Woodblend sands to an extremely fine, smooth finish. Woodblend can be coated with water or oil based timber finishes and paints. Available in six intermixable colours.

Features

  • Available in six intermixable colours.

Product code: 927


Surface preparation

Surface must be in sound condition, clean, dry and free from dust, grease, wax and oil. Indentations and holes must be clear of all loose material.

Product downloads

Coverage
5 m2/L
Surfaces
All interior timber
Type
Woodcare
Area
All interior timber, Exterior timber
Range
Woodblend
Interior or Exterior
Exterior, Interior
Application Method
Filling blade or knife
How to Apply
  1. Apply WoodBlend with a flexible filling blade or knife. Fill deep holes in approx. 10mm stages, allowing two hours drying time between each stage.
  2. To ease application, dampen blade with water.
  3. Wipe off excess with a slightly damp sponge. When dry, sand to a smooth finish.
  4. When using clear finishes, apply WoodBlend after the first coat of clear to minimise smudging.
  5. For use as a grain filler, thin WoodBlend with 5-10% water to achieve required consistency. Apply with a flexible filling blade or knife and allow to dry. When dry, sand back to bare timber, leaving filler only in the grain.
    IMPORTANT: Keep container tightly closed when not in use.

Drying Characteristics

Re-Coat Time
2 hours

Health Safety

Clean Up
Water