Features
- Water based
- High opacity
- Flat finish
- Available in 4L, 10L, 15L
- Available in White, Deep and Ultra Deep bases
Benefits
- Same day recoat
- Helps hide minor surface imperfections
Product code: 609
Uses
Use DULUX PROFESSIONAL Interior Flat Acrylic on all broad walls not subject to frequent cleaning.
Surface preparation
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas. Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.
Product downloads
- Surfaces
- Timber, Steel (Galv), Previously painted Timber/MDF/Weatherboard, Steel (mild), Concrete, Masonry, Plasterboard, Set plaster, Water proof plaster board, Brick & Block, Previously painted Plasterboard, Precast / Tilt up Concrete, Off Form Concrete, Non ferrous metals, Exposed aggregate
- Type
- Wall
- Area
- Wall, Ceiling, Door, Window, Skirting, Balustrade, Architrave, Handrail, Partitioning, Cornice, Steelwork, Shelving & storage
- Range
- Professional
- Room Space
- Bedroom, Living room, Dining room, Laundry, Office
- Interior or Exterior
- Interior
- Application Method
- Roller, Brush, Airspray, Con-Spray
Performance Guide
- Gloss Level
- <1 unit
- VOC Level
- < 55g/L untinted
Health Safety
- Clean Up
- Clean all equipment with water
Share
product details