- Bagged render finish
- Achieve multiple effects
- Hand mitt applied
- Water based
- Available in 4L, 10L
- Same day recoat and clean up
- Proven durability at high film builds
- Achieves texture finish without special training
Product code: 19585715
Application to bricks, cement render, fibre cement and masonry surfaces.
All surfaces must be thoroughly cleaned and free of all dirt, loose and flaking paint. Efflorescence or mould must be treated before application of paint. New concrete, mortar or cement render must be allowed to cure for 4 to 8 weeks depending on concrete thickness and drying conditions. Fill holes with grouting cement. Wash down with water using a stiff brush to remove all loose material. To test the adhesion of previously painted surfaces, cut an X through the existing paint with a sharp blade, press cellulose tape firmly across the cut and then rip the tape off. If the old paint or render comes off, it should be removed. On porous surfaces, applying a priming coat thinned with water (4 parts Medium Texture: 1 part water) will condition the surface and help aid application of additional coats.
- 3 square metres per L
- Room Space
- Interior or Exterior
- Application Method
- Lambswool hand mitt applicator
- Gloss Level
- VOC Level
- < 60g/L untinted
- Excellent resistance to weathering with minimal colour change and dirt pick up.
- Heat Resistance
- Softens and suffers from dirt pick up over 70 degrees
- Water Resistance
- Resists prolonged rain and condensation.
A flexible acrylic texture applied directly from the bucket by mitt application. A range of effects can be easily achieved by finishing with a lambswool hand mitt applicator, sponge, brush or broom. This traditional bagging texture is used to create a coloured mottled appearance over brickwork, diffusing, but not completely hiding the brick pattern. It can also be used to create a textured effect over smooth masonry surfaces.
- Clean Up
- Clean all equipment with water