DULUX AcraTex AcraGlaze Water Based is a clear gloss finish for application over AcraTex AcraStone (exposed aggregate) and Coventry Quartz Coat (mineral Trowel Finish) and Sienna Coarse to seal and enhance system performance.
Features
- Water based
- Binds aggregate surfaces
Benefits
- Increased durability
- Easy, safe and economical clean-up
- Protects against dirt pick-up, pollution
- Enhances natural colours & binds loose aggregate
Product code: 19420811
Surface preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.
Product downloads
- Surfaces
- Exposed Aggregate, Coventry Quartz Coat
- Type
- Protective Top Coat
- Area
- Fence, Wall, Parapet
- Range
- AcraGlaze
- Room Space
- Apartment Building, Residential Property
- Interior or Exterior
- Exterior
- Shelf Life
- 24 months maximium
- Technology Type
- 100% Acrylic
- NBR Coats
- 1
- Application Method
- Nap Roller or Airless Spray
- Clean Up Type
- Water
- How to Apply
-
Application Guide DULUX DULUX AcraTex AcraGlaze Water Based is applied in a similar manner to normal paints using brush, roller or airless spray For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. Volume solids 37% Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3 Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance
- VOC Level
- <25g/L untinted
- Weatherability
- Excellent resistance to cracking and flaking as the topcoat of a full system.
- Heat Resistance
- Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
- Water Resistance
- Contributes to moisture barrier properties of full texture systems.
- Salt Resistance
- Resists salt spray.
Drying Characteristics
- Touch Dry
- 30 Minutes
- Full Cure
- 7 days (25°C,50%R.H.)
- Re-Coat Time
- 2 hours (25°C,50%R.H.)
- Dry Film Thickness
- 22 (Micron per coat)
- Wet Film Thickness
- 60 (Micron per coat)
Specifications
DULUX AcraTex AcraGlaze Water Based is principally used for overcoating DULUX AcraTex AcraStone, Two tone DULUX AcraTex Membrane finishes. The product has also been widely used over brick & stone work as a protective clear coating.
Health Safety
- Clean Up
- Clean all equipment with water after use.
Share
product details