DULUX AcraTex AcraPatch Fine is an acrylic based, sandable, feather edging patching compound. Supplied as a water based paste requiring the addition of 5-10% cement, it exhibits minimal drying shrinkage & good adhesion to clean masonry substrates.


  • Easy to handle
  • 100% water-based acrylic
  • Fills up to 2mm defects
  • Mixes with cement


  • Fast, efficient application
  • Flexible, minimal shrinkage, easy clean up
  • Gives smooth surface for textured topcoats
  • Forms durable exterior patching material

Product code: 19420805

Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.

Product downloads

Interior or Exterior
Shelf Life
12 months maximium
Technology Type
100% Acrylic
NBR Coats
Pot Life
1 hour
Application Method
Plastering Tools : Hawk & Trowel or Broad Knife
Clean Up Type
How to Apply

Application Guide Dulux AcraTex AcraPatch Fine is Applied by Plastering Technique (Hawk and Trowel) A spatula knife can be used for isolated patching and often a sponge float is used to spread the material over extensive blow holes. Use several coats to fill larger irregularities or use DULUX AcraTex AcraPatch Coarse. , For exterior jobs use a power mixing device to incorporate 10-20% cement. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 60%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

VOC Level
< 20g/L untinted
Excellent weather resistance when mixed with cement when top coated with a full Acra-Tex system.
Heat Resistance
Up to 60C.
Water Resistance
Resists rain and condensation when top coated with a full Acra-Tex system.
Salt Resistance
Resists salt spray when when top coated with a full Acra-Tex system.

Drying Characteristics

Touch Dry
1 hour (At 2mm DFT)
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours (25°C,50%R.H.)
Dry Film Thickness
1000 (Micron per coat)
Wet Film Thickness
1667 (Micron per coat)


DULUX AcraTex AcraPatch Fine is designed as a fast applicating filler for leveling minor irregularities & blemishes of up to 2mm. DULUX AcraTex AcraPatch Fine can be applied to any clean masonry substrate. Should be topcoated with selected AcraTex coating system. External application requires the addition of 10 percent by weight of cement. For example: 2.5kg of cement/15 litre pail.