Protective coatings website
Our website contains specific product and technical information to help complete your project with the best coating system for the job.
On this site you will find Product Data Sheets and Material Safety Data Sheets for each Dulux Protective Coatings product, plus informative Tech Notes that cover a broad range of coating application and specification issues.
For maximum performance, Dulux Protective Coatings recommends that the application guidelines detailed in individual product data sheets are followed accordingly.
Did you know?
- Single pack primers and topcoats can't prevent the corrosion of steel, particularly in areas near the coastline or internal, high humidity areas such as indoor swimming pools. High performance protective coating systems are required in these situations.
- Preparation and painting of steelwork in shop not only results in a vastly superior finish that lasts much longer, but is also significantly cheaper than doing the work on site.
- Sharp edges on steelwork must be ground off to a minimum of 2mm radius before applying any protective coating. Without removal, the coating will pull away from the sharp edge, resulting in inadequate protection at this point. the result is edge corrosion.
Explore the range
Bring your vision to life with our range of premium products.
Single pack primers
Two pack primers
Single pack topcoats
Two pack topcoats
Low build, water borne, two pack epoxy floor coating for areas subject to foot traffic and vehicle traffic. Available in selected colours on the Luxafloor Colour Chart through the Colorfast™ Tint System.
Water-based, low VOC solution for the protection of vertical surfaces from graffiti and pollution ingress. Suitable for use where low odour and low solvent emissions are desired.