Acratex® AcraPrime® TXT
About Acratex® AcraPrime® TXT
Acratex® AcraPrime® TXT (Texture) is a high build, primer-sealer for exterior use on porous masonry under the Acratex® Textured Coating range. Applied by conventional nap roller, a fine aggregate fills masonry pores and minor imperfections providing a sealed anti-slip textured surface which greatly assists the application of subsequent texture coats.
Available in Trade Outlets only, applying this product may require professional painter assistance. Check your local stockist for details.
Downloads
Application
At a glance
- High Build Acrylic
- Aids application of Dulux texture Coats
- Easy application and Economical Clean Up
Areas to use
Surfaces
Masonry substrates
Previously Painted Surfaces
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and Acratex® Substrate Guide.
Brush, roller
AcraPrime TXT
Stirring: Stir well with a broad flat paddle using an up and down scooping motion.
Cutting in: Using a brush, apply sparingly to edges, internal angles and areas not accessible with a roller. Finish brushed areas with a “dabbing” motion and feather out. Do not leave thick straight edge lines as these will be visible after roller application. Alternatively, working in a team apply broad wall areas by roller, up to edges, allowing a partner to “dab” in edges whilst still wet.
Roller application: Generously load the roller and apply from the ground upwards in vertical strips.
Tip: The first few strips applied will essentially only fill the roller, with less material applied to the wall. Work these strips well to thoroughly wet out the roller. Successive strips will deliver more material to the wall
Apply the material in strips of approximately ½ –1m in length. Reload roller after each strip and repeat until a manageable section has been “delivered” (approximately 3 – 4 strips wide). Spread the material evenly by rolling diagonally across the surface. Apply a fresh strip of wet material to create a “working wet edge”, then “layoff”
Unused paint
Unused paint Do not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections. Empty paint containers Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. Do not reuse container. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
Access everything you need at your fingertips
Shop smart, shop easy
Shop with us when you want, how you want! Take control of your DuluxTRADE online account to order, track, pay and more — download the app today!
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.
