Dulux 1 Step Prep is your first step toward a superior long lasting paint finish. With mould resistance and stain blocking of tannin and flash rust, Dulux 1 Step Prep ensures your interior or exterior paint shines now and into the future. Use Dulux 1 Step Prep for all general paint surfaces around your home including interior and exterior walls, ceilings, doors, windows, trim, and especially where mould is a problem including kitchens, bathrooms & outside areas.


  • Interior & Exterior
  • Superior adhesion


  • No sanding required on most surfaces
  • Mould resistant
  • Excellent coverage

Product code: 630D0131


Use Dulux 1 Step Prep for all general paint surfaces around your home including interior and exterior walls, ceilings, doors, windows, trim, and especially where mould is a problem including kitchens, bathrooms & outside areas.

Surface preparation

Product downloads

Interior, Exterior
Wall, Furniture, Cornice, Window, Trim, Fretwork, Awning, Cupboard, Gutter, Ceiling, Skirting, Partitioning, Column, Window frame, Banister, Desk, Door, Architrave, Balustrade, Handrail, Chair, Fence, Panelling
Room Space
Apartment building, Cladding, Kitchen, Lounge, Residential Property, Study, Bathroom, Dining room, Laundry, Office, Bedroom, Hallway, Living room, Playroom
Interior or Exterior
Interior, Exterior
New or Repaint
Film Build
Approximately 34 µm per coat of the dry film
Technology Type
Application Method
Brush, roller, spray
Clean Up Type
How to Prepare

Painted and pre-primed surfaces:

  • Test if surface is sound (Refer to surface test below).
  • Ensure surfaces are clean and stains are removed as much as possible by washing down with Selleys® Original Sugar Soap, using a scourer for any tough stains.
  • Scrape off all loose and flaking paint.
  • Fill any cracks or holes with a suitable filler. Sand filled areas and any rough surfaces to a smooth finish. Dust off. For very glossy surfaces, sand to a dull finish using 240 grit sandpaper. For pre-primed surfaces, contact Dulux Help & Advice. For chalky surfaces, sand back to a strongly bound surface and dust off.


  • Fill nail holes with a suitable flexible wood filler.
  • Sand the surface to reflect the final finish you desire. Sand any raised wood fibres to a smooth finish.
  • For very dark, tannin rich timbers, use Dulux 1 Step Oil Based. For pre-treated timber, check with the timber manufacturer for preparation and painting guidelines.

Galvanised Iron & Zincalume®:
Clean with Selleys Original Sugar Soap to remove grease and dust. Thoroughly wash off with water and allow to dry.

Brick, Masonry, Fibro & Fibre Cement Board:
Freshly laid masonry and cement based surfaces should be left to cure for minimum 28 days before painting. Ensure surface is sound and clear of any loose sand or cement. Wash down with water using a stiff brush to remove all loose material. Fill holes with grouting cement. To remove any efflorescence (white salts) wipe down with a 5% solution of acetic acid (white vinegar).

Surface Test:

  1. Ensure surface is sound by cutting a small X through the existing paint with a sharp blade, press cellulose tape firmly across the cut and then rip off the tape. If the paint comes off, it is unsound and should be removed. Repeat at random in a number of areas, to test the surface.
  2. Check to see if there is any mould on the surface. If so, wash with a bleach solution (one part bleach, 3 parts water) or de-mossing chemical to remove mould or moss. Then wash with water. Refer to Dulux Help & Advice for further advice on surface preparation and product details.
How to Apply

Stir well with a broad flat paddle using an up and down scooping action. After following the surface preparation instructions, apply 1 coat of Dulux 1 Step Prep. If applying to new paperfaced plasterboard with jointing compound, a second coat may be required to ensure an even finish.
When painting exterior surfaces, ensure topcoat is applied no more than one week after application. Check the weather forecast. Do not paint on excessively cold or humid days. Exposure to rain or overnight dew whilst drying may result in the coating being damaged or removed.

Where to Use
Interior and exterior surfaces including paperfaced plasterboard, timber, MDF, brick, render, masonry, concrete, cement sheet, Zincalume®, galvanised iron, PVC and previously painted surfaces. For set plaster, use Dulux PRECISION® Sealer Binder.
Associated Thinners

Performance Guide

Green Star
Complies with the requirements for the Indoor Environment Quality credit in Green Star Australia rating tools, and the requirements for the Applied Coatings credits in Green Star New Zealand rating tools.
VOC Level
Less than 40g/L tinted & untinted

Drying Characteristics

Touch Dry
30 minutes
Full Cure
2 hours
Re-Coat Time
2 hours
Dry Film Thickness
Wet Film Thickness

Health Safety

Storage and Disposal

Unused paint: Do not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
Empty paint containers: Should be left open in a well ventilated area to dry out. When dry, recycle the container via steel can recycling programs. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. For more information on responsible disposal of paint and packaging visit paintback.com.au

Clean Up
Safety Directions
Keep out of reach of children. Avoid contact with skin and eyes or breathing vapour and spray mist (dust). Wear waterproof gloves and safety glasses. Use only in well ventilated areas. Wash hands after use.
First Aid

If poisoning occurs, contact a Doctor or Poisons Information Centre (Phone Australia 131 126; New Zealand 0800 764 766). If medical advice is needed, have product container or label at hand. SWALLOWED: If swallowed, rinse mouth. Do NOT induce vomiting. Give a glass of water. Call a POISON CENTRE or doctor/physician if you feel unwell.
Eye: If in eyes, hold eyes open, flush with running water for at least 15 minutes and see a doctor.
Skin: If skin or hair contact occurs, immediately remove any contaminated clothing and wash skin and hair thoroughly with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.
Inhaled: Remove from contaminated area – avoid becoming a casualty. Allow patient to assume most comfortable position and keep warm. Apply artificial respiration if not breathing. Seek medical advice.
For Fire: If involved in a fire use alcohol resistant foam. If unavailable, use standard foam or dry agents. Avoid breathing products of combustion.
For Spills: Clear area of all unprotected personnel. Slippery when spilt. Wear protective equipment. Absorb with sand or soil. Collect and seal in properly labelled drums. Dispose of contents/container in accordance with local, regional, national and international regulations.