Durethane™ is a non-yellowing clear two pack polyurethane finish available in high gloss and low sheen. Durethane™ has outstanding chemical and abrasion resistance and exterior durability.


  • Non yellowing
  • Excellent UV resistance
  • Outstanding chemical resistance


  • Resists moisture, grease, detergents and chemicals

Product code: 425


Clear coat for enhanced protection against weathering and graffiti attack. Used as the clear sealer over a protective coating system in: chemical plants, commercial developments, facade panels, transport.

Surface preparation

Specifiers should follow the surface preparation guidelines from the data sheet for the primer selected. The surface must be free from grease, oil, dirt, rust and other contaminants. Surface must be clean and dry before application.

Product downloads

Concrete, Polyurethane finish
Protective Coatings
Curtain wall, Canopy, Facade, Joinery
Interior or Exterior
Interior, Exterior
New or Repaint
New, Repaint
Application Method
Brush, Conventional spray and airless spray
Excellent on exterior exposure
Heat Resistance
Up to 105°C dry heat
Water Resistance
Excellent resistance to fresh and salt water but not suitable for immersion
Abrasion Resistance
Excellent when fully cured
Solvent Resistance
Excellent resistance to splash and spillage of common alcohols, aliphatic and aromatic hydrocarbons, esters and ketones
Acid Resistance
Good resistance to splash and spillage of mild acids
Alkaline Resistance
Excellent resistance to splash and spillage of most common alkalis
Salt Resistance
Excellent resistance to neutral and alkaline salts