A universal etch primer that provides a high level of corrosion protection over galvanised iron and zincalume surfaces. It is also suitable for aluminium, copper, brass, stainless steel, steel and wrought iron. 

Features

  • High performance metal protection
  • Convenient spraypak application
  • Rapid drying
  • Available in 300g
  • Available in Light Grey base

Benefits

  • Etches the surface for optimal adhesion
  • Topcoat after 10 minutes
  • Ideal for a wide range of metal substrates

Product code: 889H0164


Uses

Suitable for priming galvanised iron, zincalume, aluminium, copper, brass, stainless steel, steel and wrought iron surfaces.

Surface preparation

NOTE: Ensure the surface has thoroughly dried prior to application. Do not apply on top of existing painted surfaces. AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water.

Product downloads

General

Surfaces
Metal, Steel, Wrought Iron, Galvanised Iron, Zincalume, Aluminium, Copper, Brass, Stainless Steel
Type
Specialty, Preparation, Spray
Range
Metalshield
Room Space
Outdoor
Interior or Exterior
Exterior

Application Guide

Application Method
Can-spray

Health Safety

Clean Up
Clean up with Metalshield Brush Thinner