Dulux

Spray Plastic Primer

Dulux Spray Primer Plastic 325g 33VD1230
Product
Select Colour
Check Delivery
Find a store

Delivery within 1-3 business days.

About Spray Plastic Primer

High performance plastic primer
Ideal for use on most common hard plastics: PU, PS, PA, EPDM, ABS, GRP and hard PVC.
Fast drying

Dulux Spray Plastic Primer with Duramax Technology™ is specifically formulated to bond to a variety of plastic surfaces which typically resist coating. Fast drying and drip free formulation ensures projects can be completed quickly without compromise on finish.

At a glance

  • Fast drying spray paint
  • Ideal for priming tough to coat plastics
  • Interior & exterior durability
  • Soft touch spray tip
  • Touch dry in 20 minutes
  • Coverage: up to 5m2

Areas to use

Tiles
Glass
Laminate
Fiberglass
Glazed block and brick
Painted wood
Masonry
Do not apply to: Polyethylene, Polypropylene, Teflon or Nylon

Previously Painted Surfaces

The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray.

 

For wood, most metals (non-ferrous), porous and previously painted surfaces, and most plastics (uPVC and ABS) lightly sand the surface, no primer is required.

 

For other plastics we recommend using Dulux Spray Plastic Primer to prime your plastic.

 

For tiles, glass, enamels and laminate we recommend priming the surface with Dulux Spray Multi-Surface Primer.

Airless/Conventional Spray

1. BEFORE SPRAYING
Shake can for at least two minutes after first rattle and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Do not spray when air or surface temperature is below 10°C or above 30°C.

 

2. SPRAY APPLICATION
Hold can upright 20 to 25cm from the surface. To ensure surface compatibility, test spray on an inconspicuous area. Spray with smooth, even strokes parallel to the surface. This
product is formulated to resist running and sagging. It should be applied in several light coats, as opposed to one heavy coat.
Re-coating: Any time after 30 minutes.
Coverage: Up to 1m² per can, depending on surface.
Drying: Touch dry in 30 minutes under normal conditions.

 

3. AFTER SPRAYING
Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.

Unused paint

Spray unwanted paint onto newspaper, allow to dry and dispose of remaining contents/container in accordance with local, regional, national and international regulations.

If can becomes rusted or damaged dispose of carefully – obtain instructions from our website
or 24hr Emergency Response Number.

Cart
You have no items in your cart.
Dulux dog