Spray Low Odour Satin Magnetic Blue
About Spray Low Odour Satin Magnetic Blue
Areas to use
Precautions and limitations
For exterior usage, Dulux Spray Low Odour is recommended for projects under protected environments.
Note: Some plastics like polyethylene do not allow for paint adhesion even with primers. Test the plastic projects in an inconspicuous area first. Dulux Spray Low Odour is not compatible with Dulux Spray Plastic Primer, Dulux Spray Multi-Surface Primer or Dulux Spray Tips.
Airless/Conventional Spray
1. BEFORE SPRAYING
Shake can for at least two minutes after first rattle and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Do not spray when air or surface temperature is below 10°C or above 30°C.
2. SPRAY APPLICATION
Hold can upright 20 to 25cm from the surface. To ensure surface compatibility, test spray on an inconspicuous area. Spray with smooth, even strokes parallel to the surface. This product is formulated to resist running and sagging. It should be applied in several light coats, as opposed to one heavy coat.
Re-coating: Any time after 10 minutes.
Drying: Touch dry in less than 10 minutes, ready to use in 1 hour.
3. AFTER SPRAYING
Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.
Unused paint
Spray unwanted paint onto newspaper, allow to dry and dispose of remaining contents/container in accordance with local, regional, national and international regulations.
If can becomes rusted or damaged dispose of carefully – obtain instructions from our website
or 24hr Emergency Response Number.
Access everything you need at your fingertips
Shop smart, shop easy
Shop with us when you want, how you want! Take control of your DuluxTRADE online account to order, track, pay and more — download the app today!
Get detailed information about the physical and chemical properties of our products.
Advice for those challenges that arise in your busy and varied days
Access product datasheets, specifications, substrates, substrate preparations, safety datasheets (SDS) and create a project specification from the ground up.
