PRECISION® All Metal Primer
About PRECISION® All Metal Primer
Dulux PRECISION® All Metal Primer has excellent adhesion and is formulated with anti-corrosive pigments to inhibit rust and corrosion for the protection of metal surfaces such as galvanised iron, ZINCALUME®, wrought iron, steel, aluminium, copper, brass and stainless steel.
Downloads
Application
At a glance
- Suitable for use under Dulux topcoats
- Available in 500ml, 1L and 4L
- Water-based primer
- Interior and exterior use
- Fast drying, touch dry 20min, recoat 2hrs
Areas to use
Performance guide
• Galvanised iron
• ZINCALUME®
• Aluminium
• Steel
• Wrought iron
• Copper
• Brass
• Colorbond® or Colorsteel® and stainless steel.
This product is suitable for domestic use only.
Surfaces
• Galvanised iron
• ZINCALUME®
• Aluminium
• Steel
• Wrought iron
• Copper
• Brass
• Colorbond® or Colorsteel® and stainless steel.
Unpainted Surfaces
New galvanised iron:
Wash down surface with Selleys® Sugar Soap and a Scotch-Brite® Pad to remove grease, oils and dirt.
Rinse with clean water.
Allow to dry.
Aged or rusted galvanised iron: Remove all rust by scraping, sanding or wire brushing.
Wipe surface clean with mineral turpentine to remove residual rust, grease, oils and dirt.
Allow to dry.
ZINCALUME®, aluminium, copper, brass and stainless steel:
Wash down surface with Selleys® Sugar Soap and a Scotch-Brite® Pad to remove grease, oils, dirt and any corrosion.
Rinse with clean water.
Allow to dry.
Aged Colorbond®, pre-painted steel:
Ensure surface is sound by performing an adhesion test.
Any loose or flaking paint needs to be removed.
Spot prime bare areas with one coat of Dulux PRECISION® All Metal Primer.
Ferrous metals (steel and wrought iron), new Colorbond®:
Ensure surface is free from residual grease, oils and dirt by wiping with mineral turpentine
Brush, roller
Stir well before and during use.
For best results, apply the primer immediately after the surface preparation is complete.
For use on galvanised iron, ZINCALUME®, aluminium, copper, brass and stainless steel:
Apply one coat of Dulux PRECISION® All Metal Primer by brush, roller or spray.
Ferrous metals (steel and wrought iron):
Apply two coats of Dulux PRECISION® all metal primer by brush, roller or spray.
Thinning:
Thin if necessary with up to 50ml of water per litre.
Thinning can reduce the rust inhibiting performance of Dulux PRECISION® All Metal Primer.
Unused paint
Do not pour leftover paint down the drain.
Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections.
For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.
Empty paint containers
Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.
Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first.
Do not reuse container unless thoroughly decontaminated.
For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz
