Concrete & Paving Sealed Surface Cleaner
About Concrete & Paving Sealed Surface Cleaner
Dulux Concrete & Paving Sealed Surface Cleaner is the first stage in preparing the surface for coating. It is formulated to remove stubborn oil and grease stains for optimal adhesion of subsequent coats of paint. Also use on coated surfaces to keep them looking clean.
Downloads
Application
At a glance
- Prepares surface for Dulux Concrete & Paving Stage 2: Sealed Surface Primer
- Available in 1L or 2L
- Ideal for pebble, stone brick & previously sealed surfaces
Areas to use
Surfaces
Sealed Surfaces
Previously Painted Surfaces
Wear suitable protective clothing, including chemical resistant gloves and eyewear when mixing and applying the product.
1. Sweep the surface clean.
2. Pressure wash the surface (use a 1200psi or higher-pressure machine) to remove dirt dust, algae, mould and other contaminants.
3. Wait for the surface to be free of pooled water.
Brush, roller
• Mix the Dulux Concrete and Paving Bare Concrete Etch and Clean into a bucket or watering can at a ratio of 1 part cleaner to 20 parts water.
• Apply evenly using a plastic watering can, before scrubbing into the surface.
• Allow Dulux Concrete & Paving Sealed Surface to remain on the surface for 10-15 minutes. Ensure that the surface does not dry out.
• Power wash the surface to remove all residues released.
• Allow the cleaned surface to dry.
Unused paint
Do not pour left over paint down the drain. Unwanted paint should be brushed out on newspaper, allowed to dry and then disposed of via domestic waste collections. Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle the container via recycling programs. Disposal of empty containers via domestic recycling programs may differ between local authorities. Check with your local council to confirm local recycling programs. Alternatively, keep unwanted paint in sealed containers for disposal via special chemical waste collections. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz.
Get in touch with our local Help & Advice team by calling 13 25 25. The Dulux Help & Advice team are experts available to assist with colour, product and service questions.
- Easy to applyCreates surface adhesionCoat over most existing coatingsRelated to: Concrete & Paving Sealed Surface Cleaner
- Protects the look of the surfaceNon-yellowingEasy to applyRelated to: Concrete & Paving Sealed Surface Cleaner
- Creates a consistent surface for optimum adhesionEasy to applyRelated to: Concrete & Paving Sealed Surface Cleaner
- Prepares concrete for primingRoughens concrete surface for optimum adhesionRelated to: Concrete & Paving Sealed Surface Cleaner
- Protects the look of the surfaceEasy to applyNon-yellowingRelated to: Concrete & Paving Sealed Surface Cleaner
- Superior durabilityTintable to Dulux coloursSlip resistantRelated to: Concrete & Paving Sealed Surface Cleaner
- Tintable to Dulux coloursSuperior durabilitySlip resistantRelated to: Concrete & Paving Sealed Surface Cleaner
- Use to apply Dulux Concrete and Paving Crushed Pebble EffectRelated to: Concrete & Paving Sealed Surface Cleaner
- Slip resistantAdds decorative effectSuperior durabilityRelated to: Concrete & Paving Sealed Surface Cleaner
- Withstands high trafficTintable to Dulux coloursP5 Slip rating in 2 coatsRelated to: Concrete & Paving Sealed Surface Cleaner
