Dulux

Concrete & Paving Clear Protective Sealer Satin

3
STAGE 3 FINISH
Concrete & Paving Clear Protective Sealer Satin 4L 32QD0175
Product
Select Colour
Check Delivery
Find a store

Delivery within 1-3 business days.

About Concrete & Paving Clear Protective Sealer Satin

Protects the look of the surface
Easy to apply
Non-yellowing

Dulux Concrete & Paving Clear Protective Sealer is ideal for retaining the natural look of surfaces in high traffic areas. This clear sealer is non-yellowing, easy to apply, and suitable for protecting paths, steps, driveways and garage floors.

Application

Roller15mm nap
Brush50 to 65mm Brush
Touch dry30 mins
Re-coat timeAllow to fully dry before applying the 2nd coat
Cleaning materialsMineral Turpentine

 

Do Not Use Dulux Concrete & Paving Clear Protective Sealer Satin (32QD0175) on any of Dulux Concrete & Paving water-based topcoats and vice versa.

 

The Dulux Concrete & Paving water-based topcoats are:

  • Dulux Concrete & Paving Coloured Sealer (52RD0152, 52ND0152)
  • Dulux Concrete & Paving Crushed Pebble Effect (52WD0165, 52WD0173)
  • Dulux Concrete & Paving Super Grip (52VD0153)

At a glance

  • Spread rate of up to 6m2/L
  • Available in 4L or 10L
  • Ideal for all new and old bare concrete

Areas to use

Stone and paving paths
Steps
Garage floors
Driveways

Surfaces

Ideal for stone and paving paths, steps, garage floors and driveways where you want to protect the surface but retain the natural look. 

NOTE: Due to slip risk do not apply to gradients greater than 1:8 or

angles steeper than 7° even when anti slip additive is used. 

If unsure about your gradient please contact Dulux Help & Advice AUST 13 25 25, NZ 0800 800 424.

Brush, roller

1. Stir well before and during application with a flat paddle using an up and down scooping action. 

2. Mask all adjacent surfaces that are not needed for the application.  

3. Use a brush to apply to any edges and hard-to-reach places.  

4. Use a roller to apply 1st coat evenly across the surface. 

5. Work in small sections, slightly overlap the previous section to minimize raised edges. 

6. Gently go over the surface in the same direction with an unloaded roller using minimal pressure to give a smooth consistent finish. 

7. Allow to fully dry before applying the 2nd coat.

NOTE: For increased slip resistance, particularly around wet areas, pool surrounds and steps, please add Dulux Concrete and Paving Anti-Slip Additive. 

Unused paint

Do not pour leftover paint down the drain. 

Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections. 

For more information on responsible disposal of paint and packaging visit painttakeback.co.nz or paintback.com.au.

Empty paint containers

Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs.

Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. 

Do not reuse container unless thoroughly decontaminated. 

For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz

Customer Service

Get in touch with our local Help & Advice team by calling 13 25 25. The Dulux Help & Advice team are experts available to assist with colour, product and service questions.

Find out more
Consumer on phone to help and advice with stickers in the background on the wall.
You might also like
Cart
You have no items in your cart.
Dulux dog