Concrete & Paving Bare Concrete Etch & Clean
About Concrete & Paving Bare Concrete Etch & Clean
Dulux Concrete & Paving Etch & Clean is the first stage and essential prior to coating bare concrete surfaces. It is formulated to penetrate the concrete for optimal adhesion of subsequent coats of paint. As a concentrated formula you will visually see it working within minutes.
Downloads
Application
At a glance
- Prepares surface for Dulux Concrete & Paving Stage 2: Bare Concrete Primer
- Ideal for all new and old bare concrete
- Spread rate of up to 12m2/L
- Available in 2L or 4L
Areas to use
Surfaces
Bare concrete
Previously Painted Surfaces
Wear suitable protective clothing, including chemical resistant gloves and eyewear when mixing and applying the product.
1. Sweep the surface clean.
2. Pressure wash the surface, removing any dirt and loose materials.
3. Wait for the surface to be free of pooled water.
Brush, roller
• Mix the Dulux Concrete and Paving Bare Concrete Etch and Clean into a bucket or watering can at a ratio of 1 part cleaner to 4 parts water.
• Apply evenly using a plastic watering can, before scrubbing into the surface.
• Allow Dulux Concrete & Paving Bare Concrete Etch & Clean to remain on the surface for 10-15 minutes.
• Ensure that the surface does not dry out.
• Power wash the surface to remove all residues released.
• Allow the cleaned surface to dry.
Unused paint
Do not pour left over paint down the drain. Unwanted paint should be brushed out on newspaper, allowed to dry and then disposed of via domestic waste collections. Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle the container via recycling programs. Disposal of empty containers via domestic recycling programs may differ between local authorities. Check with your local council to confirm local recycling programs. Alternatively, keep unwanted paint in sealed containers for disposal via special chemical waste collections. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz.
- Creates a consistent surface for optimum adhesionEasy to applyRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Creates a consistent surface for optimum adhesionEasy to applyRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Prepares concrete for primingRoughens concrete surface for optimum adhesionRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Protects the look of the surfaceEasy to applyNon-yellowingRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Superior durabilityTintable to Dulux coloursSlip resistantRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Tintable to Dulux coloursSuperior durabilitySlip resistantRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Protects the look of the surfaceNon-yellowingEasy to applyRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Slip resistantAdds decorative effectSuperior durabilityRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Use to apply Dulux Concrete and Paving Crushed Pebble EffectRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Withstands high trafficTintable to Dulux coloursP5 Slip rating in 2 coatsRelated to: Concrete & Paving Bare Concrete Etch & Clean
- Mix in to Dulux Concrete & Paving Clear Protective Sealer.Related to: Concrete & Paving Bare Concrete Etch & Clean
