DULUX AcraTe 9mm is a flexible 100% acrylic, high profile Texture Coating applied by coarse (spaghetti type) texture roller and either “left off the roller” for a high profile stipple finish or subsequently “peak flattened” to produce a distinctive “cut rock” texture appearance. Roll On 9mm is specified where maximum surface hiding is required and for distinctive textural style. Specified in system with AcraShield Advance weather-proofing barrier topcoat for optimum weatherability.

Features

  • Water based
  • Provides substrate protection and a decorative texture look

Benefits

  • Easy, safe and economical clean-up
  • Reduced maintenance when top coated with Acrashield Advance
  • Application with medium texture roller
  • Exterior durability

Product code: 19420817


Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Product downloads

Type
Roll On
Range
Roll On
Interior or Exterior
Exterior
Shelf Life
24 months maximium
Technology Type
100% Acrylic
NBR Coats
1
Application Method
Coarse(Spagetti) Roller, Hopper Gun,Texture Sprayer
Clean Up Type
Water
How to Apply

Application Guide Dulux AcraTex 9mm Grade: High profile by coarse texture roller at 0.8 sq.m/l, trowel by coarse texture roller/polystyrene float at 0.6 sq.m/l, flattened by coarse texture roller/polystyrene float at 0.7 sq.m/l. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 60%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.

Performance Guide

Performance Data

Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with Acrashield Advance
Water Vapour Transmission AS458.5/C g/24h/m2 55g/24h/m2 Allows substrate to breath even when top coated with Acrashield Advance
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with Acrashield Advance
Caustic Soda diluted N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Alchol N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Distilleed Water N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Detergent Solution N/A N/A No reaction Test resulst are with Acrashield Advance top coat

VOC Level
< 32g/L untinted
Weatherability
Excellent resistance to cracking, flaking and chalking awhen topcoated with DULUX AcraTex AcraShield Advance.
Heat Resistance
Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance
Resists water and condensation when topcoated with DULUX AcraTex AcraShield Advance.
Salt Resistance
Resists salt spray especially when topcoated with DULUX AcraTex AcraShield Advance.

Drying Characteristics

Touch Dry
60 minutes
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours (25°C,50%R.H.)
Dry Film Thickness
780 (Micron per coat)
Wet Film Thickness
1300 (Micron per coat)

Specifications

Applied by "spagetti" Texure Roller to produce a high profile (aggregate containing) Texture Finish for Commercial or Residential facades
Roll On 9mm is specified in system with AcraPrime and AcraShield Advance
Typical System Specification Roll On 9mm specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 10 100 25
Texture / Body Coat Roll On 9mm 0.8 1250 780
Protective Barriercoat AcraShield Advance 6 166 75
Minimum system DFT 880
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Health Safety

Clean Up
Clean all equipment with water after use.