SteriGuard Durable Acrylic Low Sheen

  • Can be applied by brush, roller or spray.
  • Spreading rate = approximately 16m2/L.
  • Drying time approximately 2 hours depending on product.
  • Can be used in combination with any undercoat, but Dulux Professional Total Prep is recommended.

Surface preparation

Ensure all surfaces are clean and dry prior to application. Brush down to remove dust.

Previously painted surfaces

Surfaces must be sanded to remove loose, peeling, flaking or chalky paint. Sand all gloss and semi gloss surfaces to a dull finish and wipe down witha damp cloth to remove surface dust. Apply one coat of Dulux Professional Acrylic Sealer Undercoat or Dulux Professional Total Prep Acrylic to any areas that have been repaired. Previously painted surfaces must be sanded to remove loose, peeling, flaking or chalky paint. Sand all gloss and semi gloss surfaces to a dull finish and wipe down witha damp cloth to remove surface dust. Apply one coat of Dulux Professional Acrylic Sealer Undercoat or Dulux Professional Total Prep Acrylic to any areas that have been repaired.

Bare paperfaced wallboard, cement sheet & brick

Brush down to remove any surface dust. Apply one coat of Dulux Professional Total Prep Acrylic or Dulux Professional Water Based Acrylic Sealer Undercoat.

Bare interior timber

Sand smooth. Dust off. Apply one coat of Dulux Professional Total Prep Acrylic.

Bare set plaster, fibrous plaster & plasterglass

Brush down to remove any surface dust. Apply one coat of Dulux Professional Oil Based Primer Sealer Undercoat. For best results on bare set plaster and powdery surfaces apply one coat of an appropriate sealer binder.

Application

Stir well before use. Apply two coats of Dulux Professional SteriGuard Durable Acrylic.

Warning: When spraying, please ensure that the appropriate Personal Protective Equipment (PPE) is worn at all times.


Steriguard Durable Acrylic Water Based Enamels

Can be applied by brush, roller or spray.

  • Spreading rate = approximately 16m2/L.
  • Drying time approximately 2 hours depending on product.
  • Can be used in combination with any Dulux undercoat, but Dulux Professional Total Prep® is recommended. 

Note: Appropriate Personal Protective Equipment (PPE) must be used if spraying.


Steriguard Ultra

  • Can be applied by brush or roller.
  • Spreading rate = approximately 16m2/L.
  • Can be used in combination with any undercoat, but Dulux Professional Total Prep® is recommended.
  • The product is a 2 pack product where PART A must be mixed with PART B.

Note: Appropriate Personal Protective Equipment (PPE) must be used if spraying.