Ferrodor 810 is a single-pack alkyd enamel containing a high level of micaceous iron oxide, offering excellent durability in mild to moderate environments.

Features

  • Available in Natural Grey, Bridge Grey and St Enoch Grey
  • Single pack
  • Micaceous iron oxide pigmentation
  • Resistant to degradation by weathering
  • Good moisture resistance

Benefits

  • Subtle metallic lustre

Product code: 810


Uses

Micaceous iron oxide Intermediate and topcoat for protection . Typically used on: exposed pipelines, tank exteriors, roofs.

Surface preparation

Round off all rough welds and sharp edges, and remove weld spatter. Degrease by detergent wash according to AS1627.1. For all structural and decorative steel, abrasive blast clean to AS1627.4 Class 2.5. Remove all dust. Apply first coat before surface deterioration occurs.

Product downloads

Surfaces
Steel, Galvanised steel, Aluminium, Compressed fibre cement sheet
Type
Topcoat
Area
Steelwork, Decorative steelwork
Range
Ferrodor
Interior or Exterior
Exterior
New or Repaint
New, Repaint
Application Method
Roller, Brush, Airless spray, Conventional Spray
Weatherability
Excellent
Heat Resistance
Up to 120°C dry heat.
Water Resistance
Withstands long exposure in moist environments but not suitable for immersion.
Abrasion Resistance
Good abrasion resistance when fully cured.
Solvent Resistance
Resists splash and spillage of aliphatic and aromatic hydrocarbons and common alcohols.
Acid Resistance
Suitable for splash and spillage of mild acids. Aluminium containing colours are not suitable for acidic conditions.
Alkaline Resistance
Suitable for use in mild alkaline conditions. Aluminium containing colours are not suitable for alkaline conditions.
Salt Resistance
Suitable for splash and spillage of neutral and alkaline salt solutions. Aluminium containing colours are not suitable for acid conditions.

Specifications

New Steel: Power tool clean to AS1627.2 Class 2.5. Typical system: 1 x Luxaprime ZP @ 75 microns + 2 x Ferrodor 810 @ 50 microns.