Weathermax HBR MIO is a two pack polyurethane finish for long term durability in both exterior and interior areas. Weathermax HBR MIO is easily recoatable with itself after detergent degreasing and light abrasion.

Features

  • Excellent gloss retention and yellowing resistance
  • Good abrasion resistance
  • Higher film builds achievable by brush and roller than conventional polyurethanes

Product code: 77063095


Uses

Micaceous iron oxide finish coat for heavy duty protection against weathering. Generally used as part of a protective coating system in: bridges and infrastructure, coastal and offshore structures, mining, oil refineries, public spaces, rail infrastructure, road infrastructure, sugar refineries, tank exteriors, transport.

Surface preparation

Round off all rough welds and sharp edges, and remove weld spatter. Degrease by detergent wash according to AS1627.1. For all structural and decorative steel, abrasive blast clean to AS1627.4 Class 2.5. Remove all dust. Apply first coat before surface deterioration occurs.

Product downloads

Surfaces
Aluminium, Galvanised steel, Concrete, Masonry, Compressed fibre cement sheet, Steel
Type
Topcoat
Area
Window, Balustrade, Handrail, Curtain wall, Column, Awning, Steelwork, Pergola
Range
Weathermax
Interior or Exterior
Exterior, Interior
New or Repaint
New, Repaint
Application Method
Roller, Brush, Airless Spray, Conventional Spray. (Please note: Due to the MIO pigment, the appearance of the coating will differ with different application methods)
Weatherability
Excellent gloss and colour retention on exterior exposure.
Heat Resistance
Up to 120°C dry heat.
Water Resistance
Excellent resistance to fresh and salt water. Not suitable for immersion.
Abrasion Resistance
Good abrasion resistance when fully cured.
Solvent Resistance
Resists splash and spillage of most hydrocarbon solvents, refined petroleum products and most common alcohols
Salt Resistance
Unaffected by splash and spillage of neutral and alkaline salt solutions

Specifications

New steel: Abrasive blast clean AS1627.4 Class 2.5 Typical system: 1 x Durepon P14 @ 75 microns + 1 x Weathermax HBR MIO @ 100 microns.