Dulux Rust Effect is an interior/exterior effect paint that provides an authentic rusted iron finish. Dulux Rust Effect Base Paint must be used with Dulux Rust Effect Solution to achieve the Rust effect.

Features

  • Step 1 of Dulux Design Rust Effect
  • Interior/exterior
  • Available in 500ml, 1L
  • Not to be tinted

Benefits

  • Water wash up

Product code: 690D0015


Uses

Dulux Design Rust is an easy and effective way to give your interior/exterior feature wall a unique point of difference. It can also be used to transform doors and outdoor accessories into a modern design statement. To achieve an authentic rust effect, first apply 2 coats of Dulux Design Rust Base Paint and then apply 2 coats of Dulux Rust Solution. To prevent rub-off and run-off we recommend sealing the surface with a clear coat varnish such as Berger Jet Dry Stone & Paving Sealer in Natural mixed with water at a 1:1 ratio. Note: a clear coat will change the appearance of the rust effect.

Surface preparation

PREVIOUSLY PAINTED SURFACES
Dulux Rust Effect may be applied over an existing paint finish providing the surface is free of dirt, grease and dust. Scrape and sand down any loose, peeling or flaking paint. Surfaces previously painted with gloss or semi gloss paints should be sanded back to a dull finish.
Good Condition: Dust, then clean with Selleys Sugar Soap. Cracks or holes repaired with filler: Spot prime repairs with Dulux 1 Step Acrylic Primer Sealer Undercoat. Glossy Surfaces: Lightly sand to a dull finish.

UNPAINTED SURFACES
Plasterboard, Brick, Cement: Apply 1 coat of Dulux 1 Step Acrylic Primer Sealer Undercoat. Bare Timber: Apply 1 coat of Dulux 1 Step Acrylic Primer Sealer Undercoat. Set Plaster, Fibrous Plaster, Plasterglass: Apply 1 coat of Dulux Sealer Binder. Metal Surfaces: Thoroughly degrease and apply Dulux All Metal Primer.

Product downloads

Coverage
8 square metres per L
Surfaces
Paper faced plasterboard, Cement, Brick
Type
Effects
Area
Wall
Range
Design Effects Collection
Room Space
Hallway, Living room, Dining room, Bedroom
Interior or Exterior
Exterior, Interior
Application Method
Brush (do not roll/spray).
Weatherability
Recommended for interior or exterior use.
Water Resistance
Avoid exposure to steam, rain and condensation for 48 hours. To prevent rust run-off we recommend sealing with a clear coat varnish such as Berger Jet Dry Stone & Paving Sealer. Note a clear coat will change the appearance of the rust effect.
Abrasion Resistance
Rust residue may be rubbed off when touched if no sealer is applied. To prevent rub-off we recommend sealing the surface with a clear coat varnish such as Berger Jet Dry Stone & Paving Sealer. Note a clear coat will change the appearance of the rust effect.

Specifications

Interior and exterior use. Perfect for indoor or outdoor feature walls.

Health Safety

Clean Up
Clean all equipment with water