Features
- 101 Barrier Technology
- Withstands wear and tear
- Low odour & Low VOC at <16g/L tinted & untinted (Volatile Organic Compounds contribute to atmospheric pollution)
- Can be machine tinted to a wide range of colours
- Available in Vivid White, Deep, Ultra Deep, Extra Bright, True Red, Bold Yellow, Orange and Blue bases
- Available in 500ml, 1L, 2L, 4L, 10L, 15L
Benefits
- Wipe away most common marks, scuffs and stains with a wet cloth
- Looks freshly painted for years
- Exceptional washability
- Hard wearing finish that lasts
Product code: 52L
Uses
Dulux Wash&Wear Low Sheen is highly recommended for all walls, especially in medium and high traffic areas such as hallways and family rooms.
Surface preparation
Surface must be clean, dry and free from dust, oils and grease. Fill cracks or holes with filler. Spot prime repairs with Dulux® 1 Step Water Based. Glossy surfaces: Lightly sand to a dull finish. Unpainted plasterboard, brick, cement: One coat of Dulux® 1 Step Prepcoat Water Based. Bare timber: One coat of Dulux 1 Step Water Based. Set plaster, fibrous plaster, plasterglass: One coat of Dulux Sealer Binder.
Product downloads
- Coverage
- 16 square metres per L
- Surfaces
- Brick, Cement, Bare Timber, Set Plaster, Fibrous Plaster, Plasterglass, Timber, Steel (Galv), Previously painted Timber/MDF/Weatherboard, Concrete, Masonry, Plasterboard, Set plaster, Water proof plaster board, Brick & Block, Previously painted Plasterboard, Precast / Tilt up Concrete, Off Form Concrete, Steel (mild), Non ferrous metals
- Type
- Wall
- Area
- Wall, Door, Window, Skirting, Balustrade, Architrave, Partitioning, Cornice, Steelwork, Ceiling, Shelving & storage
- Range
- Wash&Wear
- Room Space
- Bedroom, Living room, Hallway, Dining room, Lounge, Office
- Interior or Exterior
- Interior
- Application Method
- Roller, Brush, Spray.
Performance Guide
- Gloss Level
- 10
- Green Star
- Complies with the requirements for the Indoor Environment Quality credit in Green Star Australia rating tools
- VOC Level
- < 16 g/L tinted & untinted
- Weatherability
- Not recommended for exterior use
- Heat Resistance
- Softens and sticks to other painted surfaces over 70C
- Water Resistance
- Suitable for use in wet areas
- Abrasion Resistance
- Good wet and dry burnish resistance and stain removal
- Solvent Resistance
- Sensitive to aromatic hydrocarbons and alcohols
Drying Characteristics
- Full Cure
- 7 days
- Re-Coat Time
- 2 hours
Specifications
Use DuluxWash&Wear Low Sheen on walls where a durable, mark resistant finish is required. Dulux Wash&Wear Low Sheen is particularly suited for high traffic, large surface areas.
Health Safety
- Clean Up
- Clean all equipment with water.
Share
product details