Features
- Two coat cover over any colour
- Concentrated titanium pigment
- Withstands wear and tear
- Available in Vivid White base
- Available in 1L, 4L, 10L, 15L
Benefits
- Ultimate hiding power
- Exceptional washability
- Mark & stain resistant
Product code: 52H
Uses
Dulux Wash&Wear +PLUS Super Hide provides ultimate hiding power due to concentrated levels of titanium pigment, for two coat cover over any colour.
Surface preparation
Surface must be clean, dry and free from dust, oils and grease. Cracks or holes with filler: Spot prime repairs with Dulux 1 Step Water Based. Glossy surfaces: Lightly sand to a dull finish. Unpainted plasterboard, brick, cement: One coat of Dulux 1 Step® Water Based. Bare timber: One coat of Dulux 1 Step Water Based. Set plaster, fibrous plaster, plasterglass: One coat of Dulux Sealer Binder.
Product downloads
- Coverage
- 16 square metres per L
- Surfaces
- Plasterboard, Brick, Cement, Bare Timber, Set plaster, Fibrous Plaster, Plasterglass, Concrete, Masonry
- Type
- Wall
- Area
- Wall
- Range
- Wash&Wear +PLUS
- Room Space
- Bedroom, Living room, Hallway, Dining room, Lounge
- Interior or Exterior
- Interior
- Application Method
- Roller, Brush, Spray
Performance Guide
- Gloss Level
- 10
- Green Star
- Complies with the requirements for the Indoor Environment Quality credit in Green Star Australia rating tools
- VOC Level
- < 16 g/L tinted & untinted
- Weatherability
- Not recommended for exterior use
- Heat Resistance
- Softens and sticks to other painted surfaces over 70C
- Water Resistance
- Suitable for use in wet areas
- Abrasion Resistance
- Good wet and dry burnish resistance and stain removal
- Solvent Resistance
- Sensitive to aromatic hydrocarbons and alcohols
Drying Characteristics
- Full Cure
- 7 days
- Re-Coat Time
- 2 hours
Specifications
Use Dulux Wash&Wear +PLUS Super Hide in areas where a hard wearing, long lasting and mark & stain resistant finish is required.
Health Safety
- Clean Up
- Clean all equipment with water.
Share
product details