Classique (Bag Finish) is a flexible Full Acrylic, tintable, Texture Coating applied directly from the bucket by mitt applicator and finished variously by bagging mitt, texturing brush or broom finish to the desired feature texture style. Typically applied over suitably prepared flush jointed brickwork softening the hard line brick profile with feature colour and texture. Specified in system with AcraShield weather-proofing barrier topcoat for optimum weatherability.
Features
- Water based
- Versatile application
- Low maintanance
- Water based
Benefits
- Easy, safe and economical clean up
- Variable decorative bagged finish
- Quick,efficient application with roller, brush and hand mitten
- Weatherproof & stays cleaner reducing maintenance when top coated with AcraShield
Product code: 19485950
Surface preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product downloads
- Surfaces
- Brick & Block
- Type
- Roll On
- Area
- Wall, Parapet
- Range
- Acratex
- Room Space
- Residential Property
- Interior or Exterior
- Exterior
- Shelf Life
- 24 months maximum
- Technology Type
- 100% Acrylic
- NBR Coats
- 1-2
- Application Method
- Nap Roller, Brush, Hand mitten
- How to Apply
-
Application Guide Classique (Bag Finish) is applied by brush or nap roller in a patina motion ( criss cross) in a two coat application. This texture is applied in a an uneven appearance to simulate that of " Bagged Finished Render" over flush jointed brick or block-work via a brush or lambswool mitt. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. Volume solids 44.81% Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3 Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance
Performance Guide
- Performance Data
-
Test results Test method Unit of measure Results Comment Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier against water ingress when top coated with 955 Acrashield Water Vapour Transmission AS458.5/C g/24h/m2 ????g/24h/m2 Allows substrate to breath when top coated with 955 Acrashield Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt resistance when top coated with 955 Acrashield Caustic Soda diluted N/A N/A No reaction Test result are with 955 Acrashield top coat Alchol N/A N/A No reaction Test resulst are with 955 Acrashield top coat Diluted mineral acid N/A N/A No reaction Test results are with 955 Acrashield top coat Distilled Water N/A N/A No reaction Test results are with 955 Acrashield top coat Detergent Solution N/A N/A No reaction Test results are with 955 Acrashield top coat
- VOC Level
- <57g/L untinted
- Weatherability
- Excellent resistance to cracking, flaking and chalking as part of full system.
- Heat Resistance
- Up to 90C (dry)
- Water Resistance
- Resists rain and condensation when top coated with Dulux AcraTex Acrashield
- Salt Resistance
- Resists salt spray especially when topcoated with DULUX AcraTex 955 AcraShield
Drying Characteristics
- Touch Dry
- 1-2 hours
- Full Cure
- 7 days (25°C,50%R.H.)
- Re-Coat Time
- 4 hours (25°C,50%R.H.)
- Dry Film Thickness
- 500 (Micron per coat)
- Wet Film Thickness
- 1116 (Micron per coat)
Specifications
| Apply using a mitt applicator working the material into and over the substrate, then whilst still wet, finish with sweeping strokes to leave a distressed "bagged-textured" finish. Classique (Bag Finish) is typically specified over primed, flush jointed brickwork, in multiple coat applications relevant to depth of mortar joints, to produce a decorative effect - softening the sharp brick line pattern | ||||
| Typical System Specification | Classique (Bag Finish), 2 coat application over AcraPrime. Premium system with AcraShield Protective Barrier Coat | |||
| Substrate Preparation | Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide | |||
| Product | Spread Rate (Sqm/L) | WFT (Micron) | DFT (Micron) | |
| Primer | AcraPrime 501 | 10 | 100 | 25 |
| Base Coat | Classique (Bag Finish) | 0.9 | 1100 | 500 |
| Finishing Texture Coat | Classique (Bag Finish) | 0.9 | 100 | 500 |
| Protective Barriercoat | 955 AcraShield | 6 | 166 | 75 |
| Minimum system DFT | 1100 | |||
| Notes | TYPICAL specification example over clean and stable flush jointed brickwork - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance | |||
Health Safety
- Clean Up
- Clean up equipment with water
Share
product details