DULUX AcraTex AcraSatin is a non-granular, acrylic elastomeric texture coating. Suitable for application over various masonry substrates. Applied by texture roller

Features

  • Water based
  • Easy to apply by texture roller
  • 100% pure acrylic

Benefits

  • Easy, safe and economical clean-up
  • Available in a low profile medium texture
  • Exterior durability

Product code: 19485790


Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide.

Product downloads

Surfaces
Concrete, Masonry, CSR Hebel Block, CSR Hebel Power Panel, Cement Rendered (sponged finish), Previously Textured, AAC, Brick & Block, Precast / Tilt up Concrete, Off Form Concrete, Previously painted
Type
Roll On
Range
AcraSatin
Interior or Exterior
Exterior
Shelf Life
24 months maximium
Technology Type
100% Acrylic
NBR Coats
2
Application Method
Nap Roller, Texture Roller or Airless Spray
Clean Up Type
Water
How to Apply

Application Guide DULUX AcraTex 961 AcraSatin High Build is a applied by regular texture roller at 1.2 sq.m/l to produce a Low Profile texture. Alternative by Nap Roller at 4 sq. m/l per coat in a two coat application for a to a achieve semi smooth finish. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 60%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

VOC Level
< 82g/L untinted
Weatherability
Excellent resistance to cracking, flaking and chalking as part of full system.
Heat Resistance
Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance
Low water transmission - Weatherproof barrier coating
Salt Resistance
Resists salt spray especially when topcoated with DULUX AcraTex AcraShield Advance.

Drying Characteristics

Touch Dry
60 Minutes
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours when applied by texture roller (25°C,50%R.H.)
Dry Film Thickness
500 (Micron per coat by texture roller)
Wet Film Thickness
833 (Micron per coat by texture roller)

Specifications

Applied by medium cell (Black) Texture Roller to produce a low-mid profile, satin texture finish.
961 AcraSatin HB is typically specified for broad wall Commercial application over Off-Form or Tilt-up concrete as a fast applying decorative-protective system.
Typical System Specification 961 AcraSatin HB, Dual Texture-Topcoat specification over AcraPrime
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat 961 AcraSatin HB 1.2 833 375
Topcoat 961 AcraSatin HB 6 166 75
Minimum system DFT 475
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
955 AcraShield Protective Barrier Coat is recommended (substituting AcraSatin topcoat) for ultimate performance or where accent colours are required