DULUX AcraTex Spray On 1mm is a flexible 100% acrylic, low profile sand finish Texture Coating designed for broad wall application typically for Commercial Applications producing a Tuscan style mineral appearance. Specified in system with AcraShield Advance weather-proofing barrier topcoat for optimum weatherability.

Features

  • 100% water-based acrylic
  • Fast Spray applicatioinn - high viscosity

Benefits

  • Exterior durability
  • Easy, safe and economical clean-up
  • Ideal for spray application for uniform finish
  • Reduced maintenance when top coated with AcraShield Advance

Product code: 19420818


Surface preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Product downloads

Surfaces
Concrete, Masonry, Cement Rendered (sponged finish), Compressed fibre cement sheet, Precast / Tilt up Concrete, Off Form Concrete, Zinc coated sheet steel (Zincalume), Concrete roof tiles
Type
Spray On
Area
Fence, Gable, Roof, Wall, Column, Cladding, Parapet
Range
Spray On
Room Space
Apartment Building, Residential Property
Interior or Exterior
Exterior
Shelf Life
24 months maximium
Technology Type
100% Acrylic
NBR Coats
1
Application Method
Hopper Gun , Texture Sprayer
Clean Up Type
Water
How to Apply

Application Guide Dulux AcraTex Spray-On 1mm is applied in two passes using a DULUX AcraTex hopper gun. Thin slightly with water to aid application of the first pass, to form a low profile motley base completely covering the substrate. Apply the second pass unthinned at 60% cover to achieve the required finish. Gun set up uses a 2 to 4mm fluid nozzle set at 50-60 psi for the first pass and 30-40 psi for the second pass. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Volume solids 65%
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance.

Performance Guide

Performance Data

Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with Acrashield Advance
Water Vapour Transmission AS458.5/C g/24h/m2 23.4g/24h/m2 Allows substrate to breath even when top coated with Acrashield Advance
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with Acrashield Advance
Caustic Soda diluted N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Alchol N/A N/A No reaction Test resulst are with Acrashield Advance top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

VOC Level
< 30g/L untinted
Weatherability
Excellent resistance to cracking, flaking & chalking as part of full system.
Heat Resistance
Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance
Resists rain and condensation when top coated with Dulux Acra-Tex Acrashield Advance
Salt Resistance
Resists salt spray when topcoated with DULUX AcraTex AcraShield Advance .

Drying Characteristics

Touch Dry
60 minutes
Full Cure
7 days (25°C,50%R.H.)
Re-Coat Time
24 hours (25°C,50%R.H.)
Dry Film Thickness
500 (Micron per coat)
Wet Film Thickness
800 (Micron per coat)

Specifications

Applied by Hopper Gun (gravity feed) or Air-assisted TexSpray pump, to produce a fine-medium (aggregate) Texture profile.
Typically used for broadwall Commercial facades, Spray On 1mm is specified in system with AcraPrime and AcraShield Advance
Typical System Specification Spray On 1mm specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 10 100 25
Texture / Body Coat Spray On 1mm 1.3 800 500
Protective Barriercoat 955 AcraShield Advance 6 166 75
Minimum system DFT 600
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Health Safety

Clean Up
Clean all equipment with water.