Is your paint work looking a little dull?

Possible Cause

Premature fading often occurs on surfaces with a sunny exposure. It can also be due to chalking of the coating and can be caused by any of the following:

  • Using an interior grade of paint for an outdoor application
  • Using inferior quality paint
  • Using a paint colour that is particularly vulnerable to UV rays (most notably bright reds, blues and yellows)
  • Tinting a white paint not intended for tinting, or over tinting a light or medium paint base
  • Lower than prescribed dry film builds application

 

Solution

Colour fading is irreversible once it begins to occur and the colour can often become quite irregular or patchy in appearance. To eliminate the effect the entire surface will need to be pressure washed and/or scrubbed with a non-metallic scouring pad to remove all surface contaminants and chalking prior to repainting.


To minimise colour fading:

  • Dulux Weathershield is recommended as it exhibits UV protection and high performance colour durability
  • Select lighter colours as they absorb less heat and UV radiation
  • Ensure paint is applied at the recommended spreading rate (correct dry film build)
     

More problem solving advice

Mould

If you’ve noticed black, grey or brown areas on your painted surface, chances are you’re dealing with a mould problem.  For each problem you’ll find a guide to identifying it, its causes and solutions.

Cracking / flaking

Cracking or flaking is the splitting of a dry paint film. This is a problem that needs fixing as it can lead to complete failure of the paint. For each problem you’ll find a guide to identifying it, its causes and solutions.