Have you noticed bubbles in your paint film? It’s called blistering and results from the loss of adhesion between the paint and its underlying surface.

blistering

Possible Cause

Blistering can be caused by:

  • Painting a warm surface in direct sunlight.
  • Applying oil-based or alkyd paint over a damp or wet surface.
  • Moisture escaping through the exterior walls (this is less likely with latex paint than oil-based or alkyd paints).
  • Exposure of latex paint film to dew, high humidity or rain shortly after paint has dried.

 

Solution

Old painted surfaces will require adequate surface preparation. The first step is to carry out a series of “adhesion tests” to clearly determine the quality of the existing paint work. Simply cut a small X through the existing paint with a sharp blade, press cellulose tape firmly across the cut and then rip off the tape. If the paint comes off, it is unsound and should be removed.

 

Prevention

Paint application substrate must return well under 10% moisture content; any moisture ingress must be isolated. Trapped moisture within substrate will compromise new paint system performance and result in blisters and eventual paint system delamination.


More problem solving advice

Mould

If you’ve noticed black, grey or brown areas on your painted surface, chances are you’re dealing with a mould problem.  For each problem you’ll find a guide to identifying it, its causes and solutions.

Cracking / flaking

Cracking or flaking is the splitting of a dry paint film. This is a problem that needs fixing as it can lead to complete failure of the paint. For each problem you’ll find a guide to identifying it, its causes and solutions.