Render looking a little worn? Revive your render surfaces and give it the Dulux treatment for a fresh near-new look.

Instructions

  1. First you need to understand what paint quality you’re dealing with. Using a sharp blade cut an X in your existing surface and cover with tape. If paint comes away when the tape is ripped off then it’s unsound and needs to be completely removed.
  2. Bigger cracks and holes will need to be filled with exterior grade render filler.
  3. To clean your wall, remove any white salts with a 5% solution of white vinegar. For moss or mould, wash the wall with a bleach solution or de-mossing chemical. Once dry, make sure you mask any surface you don’t want to paint and use drop sheets to cover any plants you may be painting around.
  4. Now you’re ready to start painting with Dulux Weathershield Render Refresh. Start by using your brush to cut in around the edges. Then paint the rest of the surface with the roller, starting from the top corner in smooth up and down strokes.

    TIP: To get an even tint when using multiple cans, pour half of the second can into the first after you’ve filled your paint tray and continue this across all cans.

  5. When painting your second or final coat, lay-off your paint every 2-3 metres. Making sure you maintain a wet edge, roll the roller down the wall from top to bottom, making sure to overlap it slightly.
  6. And you’re done! Don’t forget to turn your leftover paint into hard waste with Dulux® Envirosolutions® Waste Paint Hardener

Related how to guides

 

Exterior paint preparation

There are some key points to note when preparing to paint exterior areas. Using the correct technique and quality paints will result in a painting job that is faster, cheaper and easier to use than alternative methods.

Repainting exterior and weather affected surfaces

Your guide to product selection for repainting interior and exterior weather affected surfaces.