Dulux Metalshield Gutter & Fascia Touch-up Paint is a semi-gloss topcoat that can be applied to a range of metal substrates and pre-painted surfaces. It is ideal for the touch-up and maintenance of pre-painted gates, fences, gutters, downpipes and roller doors.

Features

  • Semi gloss finish
  • Rapid dry 30min, recoat 2hrs
  • Available in 300g
  • Available in 25 colours

Benefits

  • No primer required for new bare steel, wrought iron or pre-painted metal surfaces
  • Ideal for gates, fences, gutters, downpipes and roller doors

Product code: 889


Uses

Typical areas of application include the coating and maintenance of metal gates, fences, gutters, downpipes and roller doors.

Surface preparation

NOTE: Ensure the surface has thoroughly dried prior to application. PRE-PAINTED METAL SURFACES: Scrape off all loose and flaking paint. Sand all surfaces to a flat finish. Dust off. If previously painted surface is in good condition than no primer is required. Treat any bare metal as below. AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield Etch Primer Spraypak. NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. For maximum protection apply 1 coat of Metalshield Etch Primer Spraypak first. GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshi

Product downloads

Surfaces
Metal, Steel, Wrought Iron, Galvanised Iron, Zincalume, Aluminium, Copper, Brass, Stainless Steel
Type
Specialty
Area
Gate, Fence, Gutter, Downpipe, Roller Door
Range
Metalshield
Room Space
Outdoor
Interior or Exterior
Exterior
Application Method
Can-Spray

Drying Characteristics

Touch Dry
30 minutes
Re-Coat Time
2 hours

Health Safety

Clean Up
Clean up with Metalshield Brush Thinner