Luxathane HPX is a high performance full gloss, two-component acrylic polyurethane that is recoatable with minimum surface preparation. It is formulated for use in industrial, chemical and marine environments where excellent gloss and colour retention during extended service periods are required. The smooth, durable, high gloss finish is ideal for steelwork and facades of commercial projects, such as retail complexes and high rise offices and apartments and in areas prone to defacement by spray-can graffiti. 

Product code: 764


Uses

High performance finish coat for aesthetics and protection against weathering and graffiti attack. Generally used as part of a protective coating system in: facade panels, commercial developments, high rise apartments, joinery, rail infrastructure, retail complexes, sporting facilities, tank exteriors, transport.

Surface preparation

Specifiers should follow the surface preparation guidelines from the data sheet for the primer selected. The surface must be free from grease, oil, dirt, rust and other contaminants.

Product downloads

Surfaces
Steel, Aluminium, Galvanised steel, Concrete, Fibreglass, MDF
Type
Topcoat
Area
Facade, Joinery, Steelwork
Range
Luxathane
Interior or Exterior
Interior, Exterior
New or Repaint
New, Repaint
Weatherability
Excellent gloss and colour retention on exterior exposure
Heat Resistance
Up to 120°C dry heat
Water Resistance
Excellent resistance to fresh and salt water but not suitable for immersion
Abrasion Resistance
Excellent when fully cured
Solvent Resistance
Unaffected by splash and spillage of common alcohols, aliphatic and aromatic hydrocarbons, esters and ketones
Acid Resistance
Suitable for splash and spillage exposure to most acids
Alkaline Resistance
Good resistance to splash and spillage of most common alkalis
Salt Resistance
Unaffected by splash and spillage of most salt solutions

Specifications

STEEL: Abrasive blast AS1627.4 Class 2.5. Typical System: 1 x Zincanode 402 @ 75 microns + 2 x Luxathane HPX @ 50 microns