Intergrain DWD is a high performance, low sheen, semi-transparent water based exterior finish formulated to retain the natural appearance of timber decking and all other exterior timber. DWD is designed to protect timber with a tough, weather resistant finish of superior durability for Australian conditions. DWD has excellent UV, water and mould resistance is low odour, and available in a range of tinted colours. Note: Being water based, DWD emits significantly less VOC’s (volatile organic compounds) into the atmosphere than traditional oil based finishes. This makes DWD safer to use, and much gentler on the environment. DWD Must be applied as per the Trishield Application Process: Intergrain Reviva Timber Cleaner (STAGE 1), then Intergrain Dimension 4 UltraPrimer (STAGE 2), then Intergrain DWD (STAGE 3). ALWAYS apply DWD in accordance with this process to ensure maximum lifespan from the coating.
Features
- A tough, weather resistant finish
- Available in a range of tinted colours
Product code: 55294806
Surface preparation
Prepare surface and apply Dimension 4 UltraPrimer according to label instructions. Note: If Dimension 4 UltraPrimer was applied more than three months ago, clean all timber with Intergrain Reviva Timber Cleaner according to label instructions. Remove excess pooled water and ensure surface is clean. Allow timber to dry thoroughly. Then, reapply Dimension 4 UltraPrimer according to label instructions.
Product downloads
- Product Data Sheet
- Material Safety Data Sheet
- Coverage
- 10 m2/L
- Surfaces
- Cypress Pine, Jarrah, Merbau, Spotted Gum, Treated Pine
- Type
- Woodcare
- Area
- Wall, Decking, Garden furniture, Fence, Gate
- Range
- DWD
- Interior or Exterior
- Exterior
- Application Method
- Spray, Pad applicator, Synthetic or pure bristle brush
- How to Apply
- DWD Must be applied as per the Trishield Application Process: Intergrain Reviva Timber Cleaner (STAGE 1), then Intergrain Dimension 4 UltraPrimer (STAGE 2), then Intergrain DWD (STAGE 3). ALWAYS apply DWD in accordance with this process to ensure maximum lifespan from the coating.
Drying Characteristics
- Full Cure
- 7 days
- Re-Coat Time
- 4 hours
- Care and Maintenance
- 1. Conduct a routine 12 monthly maintenance inspection. 2. Best protection of the timber and ease of maintenance is ensured if DWD is recoated before deterioration of the coating and timber underneath occurs. 3. First indication of the need for recoating will be observed as patchiness or thinning of the surface coating on edges and areas where insufficient product has been applied. 4. If small areas of timber have weathered through to cause deterioration of the coating, clean area thoroughly with Reviva, sand, remove sanding dust, then coat using the DWD TriShield Application System. 5. For large weathered areas remove DWD with Intergrain Liquid 8™ Timber Stripper. 6. and power washing or sand, remove sanding dust then coat using the DWD TriShield Application System. 7. To recoat DWD which is in good condition, clean the surface with Reviva according to label instructions and apply one c
Health Safety
- Clean Up
- Water
Share
product details